Epoxy.com Polymer Systems
- Epoxy.com Product #120 Modified Concrete Admixture is a modified latex liquid admixture to improve the bond of Portland cement concrete toppings, thin-sets, patches, leveling courses, slush coats, stucco; and to improve the "hang" of vertically applied flash coats.
- Epoxy.com Product #1000 Fast Setting Mortar with Migratory Corrosion Inhibitor
is a one component trowelable patching mortar designed for overhead and vertical use.
Epoxy.com Product #1000 Fast Setting Mortar with Migratory Corrosion Inhibitor is a special blend of fiber reinforced fast setting cement with silica fume, polymeric compounds and aggregates which achieves structural properties in a short time. It is ready to use with just the addition of clean water which activates the modified cement mortar.
- Epoxy.com Product #1001 Fast Setting Fiber Reinforced Mortar is composed of polymer resin, selected plasticizers, cement, synthetic fibers and aggregates.
Epoxy.com Product #1001 Fast Setting Fiber Reinforced Mortar is conveniently packaged in a two part unit to produce the ultimate in bond, compressive strength, and impact resistant properties for a repair mortar
- Epoxy.com Product #1002 Polymer Modified Mortar
- Epoxy.com Product #1003 Feather Patch - one component Polymer Modified cementitious repair mortar that can be used for interior and exterior repairs
- Epoxy.com Product #1004 Self Leveling Floor Topping
is a one component copolymer modified cementitious topping. It is ready to use with only the addition of clean water to activate the polymer modified cement topping.
Epoxy.com Product #1004 Self Leveling Floor Topping has a special blend of plasticizers to provide zero shrinkage, high flow and bonding properties necessary for floor topping.
- Epoxy.com Product #1005 Rapid Set Mortar is a non-shrink cementitious blend with exact ratios of graded siliceous aggregates and other ingredients that produce a strong, durable, rapid repair and resurfacing product.
Epoxy.com Product #1005 Rapid Set Mortar is easy and fast to use and has excellent durability and workability.
Epoxy.com Product #1005 Rapid Set Mortar is ready to use, simply add potable water and mix to desired consistency. It is specifically formulated and manufactured to meet Maryland DOT Class II, Type II rapid setting mortar or concrete.
- Epoxy.com Product # 1006 Self leveling Underlayment
- Epoxy.com Product #1007 Polymer Repair Mortar
Epoxy.com Product #1008 Rapid Hardening Polymer Repair Mortar
is a one component polymer modified, shrinkage-compensated cement-based mortar. It is designed for horizontal concrete surfaces where high early strength gain is required. The blend of special cements, aggregates, fibers and polymers produce a highly durable mortar or concrete in a short time.
- Epoxy.com Product #1009 Repair Mortar is a polymer modified cement-based topping. It is ideal for leveling and or resurfacing distressed, rough and/or uneven concrete floors. It is easy to use. Add potable water at the jobsite.
Proper mixing and installation is critical to the optimal success
of all product. See
MSDS for more details on our products.
Be sure to contact us with any questions and/or concerns that you
For more information please contact:
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Florida & Vermont
Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch
321-206-1833 Customer Service - Ordering and Order Status
Katey Fontaine, VP - Customer Service Director
352-533-2167 Norm Lambert, President - Technical Support Director
352-489-1666 Accounting and Administration
Debby Lambert, CEO, and CFO
352-489-1625 Fax line to all Departments
24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
|| We accept MasterCard, Visa, American Express, Discover,
or Wire Transfers.|
Copyright © 1994-2013 EPOXY.COM
a division of Epoxy Systems, Inc. -
Florida and Vermont. All rights reserved.
other wise agreed upon in writing, buyer is responsible for the cost of
information is presented in good faith to assist in determining whether this
product is suitable for application. No warranty or representation, however, is
intended or made, nor is protection from any law or patent to be inferred, and
all patent rights reserved.
division of Epoxy Systems, Inc. warrants its products (when
properly stored) for the period of time as follows: Epoxies, Product
#315, Product #315BC, and Product #316 one (1) year; Polyesters,
Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months;
Power Tools and Equipment 90 days; Vinyl Esters, and all other
resins (not specifically mentioned above) 30 days; hand tools
(non-power tools) 30 days. Epoxy.com warrants that its
products will be free of manufacturing defects and will be in
conformity with published specifications when handled, stored, mixed
and applied in accordance with recommendations of Epoxy.com. If any
product fails to meet this warranty, the liability of Epoxy.com will
be limited to replacement of any non-conforming material if notice
of such non-conformity is given to Epoxy.com within the warranty
period for the material (as indicated above), or within 1 year of
the delivery of materials (whichever is sooner). Epoxy.com may in
its discretion refund the price received by Epoxy.com in lieu of
replacing the material. No customer, distributor, or representative
of Epoxy.com is authorized to change or modify the published
specifications of this warranty in any way. No one is authorized to
make oral warranties on behalf of Epoxy.com. In order to obtain
replacement or refund the customer must provide written notice
containing full details of the non-conformity. Epoxy.com reserves
the right to inspect the non-conforming material prior to
replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE
ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE
OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL
HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD
PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER
DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All
quotes and sales subject to availability.
Many of our
products are made on an individual order basis. Unless
authorized in writing by Epoxy.com a division of Epoxy Systems, Inc.
in writing before the material is made, there are no returns on
items purchased from us, once the order has been processed, and the
material made. In the event of authorized returns a restocking
charge will be charged in the amount of 30% of the value of the
material returned or $150 whichever is greater. No returns on
non-list priced items. All Returns are for merchandise (store)
credit only, no cash or credit card credits. In the event of a
return, buyer is responsible for the cost of shipping and handling
in both directions.
[Catalog of Products]
[Where to Start]
[Elastomeric Polyurethane Systems]
[Epoxy Resin Systems]
[Seamless Garage Floors]
[High Temperature Epoxy]
[Joint Systems / Sealants]
[Methyl Methacrylate (MMA)]
[Mortars / Grouts]
[Who We Are]
[Tech Data Sheets in Acrobat Format]
[MSDS in Acrobat Format]
[Online Ordering Authorization Form]
[Add this page to Favorites]