Epoxy.com Mortars and Grouts
Depending on how you mix the aggregate into the products below, they can be
used as a mortar for overlays, or a grout for sealing between other hardened
construction materials. Contact Epoxy.com Technical Support Department with your
specific project and questions.
- Epoxy.com Product #10 Lo-Mod
Adhesive and Mortar Binder is a 100% solids epoxy has a low modulus
of elasticity (flexibility) and is Low Viscosity. An adhesive used as a binder
for epoxy mortar systems in patching and grouting applications, as a seal coat
for non-skid surfaces outside, and as a primer to insure high bond strength for
coatings and patches.
- Epoxy.com Product #10 Fast
Curing Version
- Epoxy.com Product #10 Cold
Temperature Curing Version
- Epoxy.com Product #14 Pigmented Mortar - Replace by
Epoxy.com Product #24
- Epoxy.com Product #15 Chemical
Resistant Flooring Resin - a two component, seamless 100%
solids epoxy resurfacing system with High Chemical Resistance. It may be
applied as a coating, or combined with silica sand or
Epoxy.com multi-colored quartz aggregate to produce a durable, easy to
maintain floor, on both new and old surfaces.
Epoxy.com Product #15 Chemical Resistant Flooring Resin has superior
clarity and UV stability.
- Epoxy.com Product #16 Epoxy
Mortar Resin - Replaced by
Epoxy.com Product #24
- Epoxy.com Product #17
Decorative Stone Overlay Adhesive Resin - a two component,
100% solids high-mod epoxy adhesive used for bonding stone and other
aggregates in all types of flooring applications. Some uses would include
patios, pool decks, walkways and other areas where a long wearing and
decorative system is desired.
- Epoxy.com Product #18 General
Purpose Epoxy - a hard set epoxy compound formulated for
general use. Epoxy.com Product #18 cures at room temperature and is a low
viscosity system. This durable, resilient material requires no post curing
to achieve permanent bond strength. Mixing ratio of 1 to 1 makes this
product easy to use. Epoxy.com Product #18
General Purpose Epoxy solves many difficult bonding, and epoxy mortar
problems. Product has the ability to bond to a variety of substrates
including cannot dry and hard to dry surfaces.
- Epoxy.com Product #19
its new stock numbers are Epoxy.com Product
#24 (for the pigmented) and Epoxy.com
Product #28 for clear.
- Epoxy.com Product #20 Epoxy
Grout - a moisture insensitive, two-component, 100% solids
epoxy resin system manufactured specifically for use in temperatures of 40°F
and below. It is recommended for injection or anchor-bolt grouting in the
neat state or as a mortar when mixed with up to 3 1/4 parts of
Epoxy.com Product #76 - Epoxy Filler
(by volume). Epoxy.com Product #20 Epoxy
Grout exceeds most requirements of ASTM C-881-90, Types I, Grade 1,
Class A.
- Epoxy.com Product # 22
Underwater Epoxy Mortar that is a moisture insensitive,
two-component, 100% solids epoxy resin. This material is specifically
designed for use with the Epoxy.com Fiberglass Systems & Shapes, as well as
your own custom forms. Can also be used as self-leveling flooring.
- Epoxy.com Product # 24
Pigmented Mortar is a multipurpose colored epoxy binder for
Epoxy.com Mortar Systems This all purpose epoxy resin is
characterized as an excellent general purpose material with good clarity and
color retention. It is essentially odorless and can therefore be used in
occupied areas.
- Epoxy.com Product #24 Fast
Pigmented Mortar - Fast Cure
- Epoxy.com Product #24 Cold
Pigmented Mortar - Cold Temperature Cure
- Epoxy.com Product #25 Epoxy
Mortar Kit standard - a 100% solids epoxy resin and specially
selected aggregate system. Units are preproportioned for ease of mixing and
use on the jobsite. It is a flowable, self-leveling grout, with handling and
physical characteristics superior to similar grouts.
- Epoxy.com Product #26 Epoxy
Mortar Kit - This data sheet is here for reference only.
This product has been replaced by its new and improved version
Epoxy.com Product #26HP.
- Epoxy.com Product #26HP
Epoxy Mortar Kit - is a high strength, non shrink, 100% solids
epoxy grout. Epoxy Resin and specially formulated aggregate produce a fluid,
non shrink precision grout. Units are preproportioned for ease of mixing and
use on the jobsite. Epoxy.com Product
#26HP Epoxy Mortar Kit has superior handling and physical
characteristics when compared to conventional epoxy grouts. Note:
This is not a stock item, please allow up to 2 weeks for us to manufacture
this for your order.
- Epoxy.com Product #27 Long Pot
Life Mortar Kit is a preproportioned 100% solids epoxy resin
pack and a blend of special aggregate. The pot life of
Epoxy.com Product #27 Long Pot Life Mortar Kit is 3 times longer than
ordinary epoxy packs; while curing the entire pack, a low exotherm is
produced.
- Epoxy.com Product #28 Epoxy
Mortar - Honey Clear Mortar 4:1 Ratio a multipurpose colored
epoxy binder for Epoxy.com Mortar Systems This all purpose epoxy resin is
characterized as an excellent general purpose material with good clarity and
color retention. It is essentially odorless and can therefore be used in
occupied areas.
- Epoxy.com Product #29 Cold
Temperature Cure Mortar is a specially formulated binder for
cold temperature applications. Able to cure at temperatures as low as 35°F.
They are often used in coolers and food preparation areas that require
constant low temperatures. Product #29 Cold Temperature Cure EPOXY MORTAR is
also frequently used in room temperature applications to meet super-fast
cure, limited shutdown needs.
- Epoxy.com Product #105 Concrete Catalyst
-
Epoxy.com Product #115 Epoxy Systems for Modifying Concrete
is for modifying concrete is a two component, 2:1 ratio, 100% solids,
liquid epoxy resin system. It can be added to conventional concrete or
mortar mixes to produce high strength, epoxy modified concrete or mortar
mix.
-
Epoxy.com Product #115 Part "C" powder additive for
Product
#115 Epoxy Systems for Modifying Concrete - to insure
ultimate strength.
-
Epoxy.com Product #120 Modified Concrete Admixture is a
modified latex liquid admixture to improve the bond of Portland cement
concrete toppings, thin-sets, patches, leveling courses, slush coats,
stucco; and to improve the "hang" of vertically applied flash coats.
-
Epoxy.com Product #150 Polyester Grout is a three
component, flowable, fast-setting, 100% reactive polyester grout
specifically formulated for anchor bolt setting.
Epoxy.com Product #150 Polyester Grout may also be used as a grout
for floor topping where chemical resistance is required.
-
Epoxy.com Product #224 Water Cleanable Epoxy Mortar Resin
is a user friendly, water cleanable, 100% solids epoxy grout and
adhesive. Used for grouting ceramic tile, brick pavers, and stone, it is
supplied in pre-packaged kits containing resin, hardener, and (in the
Epoxy.com
Product #225 Water Cleanable Epoxy Mortar Resin Kit) mineral fillers
that produce a dense, uniform seal. Typical applications for #224
require resistance to thermal shock, chemicals, and heavy traffic
including meat packers, breweries, canneries, bottlers, CIP areas, and
pharmaceutical formulators.
-
Epoxy.com Product #225 Water Cleanable Epoxy Mortar Kit -
includes Epoxy.com
Product #224
along with the aggregate. Mix the three components together for a ready
to use system.
-
Epoxy.com Product #235 Chemical Resistant Novolac Epoxy Tile Grout and
Adhesive is a highly chemical resistant, industrial grade,
Novolac epoxy grout for ceramic tile, quarry tile, brick pavers, and
stone.
Epoxy.com Product #235 Chemical Resistant Novolac Epoxy Tile Grout and
Adhesive is supplied in pre-packaged kits containing resin,
hardener, and mineral fillers that produce a dense, uniform seal.
Typical applications for
Epoxy.com
Product #235 Chemical Resistant Novolac Epoxy Tile Grout and Adhesive
require superior resistance to thermal shock, chemicals, and heavy
traffic found in the harsh environments of dairies, bakeries, meat
packers, breweries, canneries, bottlers, distilleries, and
pharmaceutical plants
-
Epoxy.com Product #630 Novolac Coating/Mortar Binder - a
100% solids epoxy Novolac ideal for harsh chemical and solvent resistant
applications. It is ideal for use as a troweled mortar, slurry binder,
and coating for concrete and steel in extremely corrosive areas where
resistance to 98% sulfuric acid or other strong caustics is needed.
Epoxy.com
Product #630 Novolac Coating/Mortar Binder is ideal for use as a
protective coating for concrete and steel in the extremely corrosive
areas of chemical plants and pulp mills secondary containment areas,
water and waste treatment, and gas and electric utilities.
-
Product #641LV High Temperature Resistant Epoxy Mortar Resin
is a two component highly cross-linked Novolac epoxy resin
system. It is especially formulated to be used as a high temperature
grouting or laminating resin.
Epoxy.com
Product #641LV High Temperature Resistant Epoxy Mortar Resin is used
to protect concrete, steel and other substrates from high temperatures
and corrosion.
Other Products of Interest

|
|
Proper mixing and installation is critical to the optimal success
of all product. See
Installation Tips,
Techdata, &
MSDS for more details on our products.
Be sure to contact us with any questions and/or concerns that you
have.
For more information please contact:
Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over
350 products,
Since 1980
Florida & Vermont
USA
Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch
321-206-1833 Customer Service - Ordering and Order Status
Katey Fontaine, VP - Customer Service Director
sales@epoxy.com
Technical Support
352-533-2167 Norm Lambert, President - Technical Support Director
info@epoxy.com
352-489-1666 Accounting and Administration
Debby Lambert, CEO, and CFO
office@epoxy.com
352-489-1625 Fax line to all Departments
www.epoxy.com
24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
| We accept MasterCard, Visa, American Express, Discover,
or Wire Transfers. |
Copyright © 1994-2013 EPOXY.COM
a division of Epoxy Systems, Inc. -
Florida and Vermont. All rights reserved.
Unless
other wise agreed upon in writing, buyer is responsible for the cost of
shipping.
This
information is presented in good faith to assist in determining whether this
product is suitable for application. No warranty or representation, however, is
intended or made, nor is protection from any law or patent to be inferred, and
all patent rights reserved.
Epoxy.com a
division of Epoxy Systems, Inc. warrants its products (when
properly stored) for the period of time as follows: Epoxies, Product
#315, Product #315BC, and Product #316 one (1) year; Polyesters,
Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months;
Power Tools and Equipment 90 days; Vinyl Esters, and all other
resins (not specifically mentioned above) 30 days; hand tools
(non-power tools) 30 days. Epoxy.com warrants that its
products will be free of manufacturing defects and will be in
conformity with published specifications when handled, stored, mixed
and applied in accordance with recommendations of Epoxy.com. If any
product fails to meet this warranty, the liability of Epoxy.com will
be limited to replacement of any non-conforming material if notice
of such non-conformity is given to Epoxy.com within the warranty
period for the material (as indicated above), or within 1 year of
the delivery of materials (whichever is sooner). Epoxy.com may in
its discretion refund the price received by Epoxy.com in lieu of
replacing the material. No customer, distributor, or representative
of Epoxy.com is authorized to change or modify the published
specifications of this warranty in any way. No one is authorized to
make oral warranties on behalf of Epoxy.com. In order to obtain
replacement or refund the customer must provide written notice
containing full details of the non-conformity. Epoxy.com reserves
the right to inspect the non-conforming material prior to
replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE
ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE
OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL
HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD
PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER
DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All
quotes and sales subject to availability.
Many of our
products are made on an individual order basis. Unless
authorized in writing by Epoxy.com a division of Epoxy Systems, Inc.
in writing before the material is made, there are no returns on
items purchased from us, once the order has been processed, and the
material made. In the event of authorized returns a restocking
charge will be charged in the amount of 30% of the value of the
material returned or $150 whichever is greater. No returns on
non-list priced items. All Returns are for merchandise (store)
credit only, no cash or credit card credits. In the event of a
return, buyer is responsible for the cost of shipping and handling
in both directions.
[Home]
[Catalog of Products]
[Where to Start]
[[Bonding Systems]
[Chip Floors]
[Chemical Resistance]
[Coatings]
[Conductive Flooring]
[Applications]
[Elastomeric Polyurethane Systems]
[Epoxy Resin Systems]
[Seamless Garage Floors]
[High Temperature Epoxy]
[Industrial Floors]
[Injection]
[Joint Systems / Sealants]
[Methyl Methacrylate (MMA)]
[Mortars / Grouts]
[Novolac Epoxy]
[Polymer Systems]
[Primers Sealers]
[Misc.]
[Seamless Flooring]
[Waterproofing]
[Dealers Wanted]
[Installation Tips]
[Product Guide]
[Wood Filler]
[Who We Are]
[Guide Specs]
[Tech Data Sheets in Acrobat Format]
[MSDS in Acrobat Format]
[Online Ordering Authorization Form]
[Add this page to Favorites]
6475934
|