Epoxy.com 100% Solids Epoxy
- Epoxy.com Product
#1 All Purpose Coating is a 100% solids epoxy Hi-Build epoxy
coating used for high foot and light forklift traffic areas where abrasion
resistance is required; for protection against mild corrosion; and as a
decorative waterproof coating for walls, floors, tanks, etc . Also available
fast, and Cold Temperature Cure versions.
- Epoxy.com Product #1W
is a two component, 100% solids epoxy Hi-Build epoxy coating used for high
indoor traffic areas where abrasion resistance is required; for protection
against mild corrosion; and as a decorative waterproof coating for walls,
tanks, etc.
- Epoxy.com Product #217 Floor Coating Primer
-
Epoxy.com Product #218 Floor Coating Intermediate
- Epoxy.com Product #219 Floor Coating Top Coat
- Epoxy.com Product #221 Replaced by
Epoxy.com Product #707 Splash Zone & Under Water Paste
- Epoxy.com Product #250 Non-
Potable Water Tank Coating is a 100% solids, moisture-
insensitive epoxy coating, containing no solvents. It is mixed at a 2:1
ratio, produces a tough, chemical and abrasion-resistant coating for dry or
damp concrete, wood or steel surfaces.
- Epoxy.com Product #255 Mastic
High Build Epoxy Coating is a 100% solids,
moisture-insensitive, epoxy resin system. When mixed at a 1:1 ratio, by
volume, it produces an excellent coating for dry or damp concrete, wood or
steel surfaces. It iss used on piles, piers, and concrete or steel tanks
where concrete or steel needs to be protected from abrasive environments.
- Epoxy.com Product #315BC Polymeric Coating
and Base Coat for the 315Chip
Flooring System. It can also be used as a stand alone coating.
If Epoxy.com Product #315BC is used as a stand alone coating over concrete,
it is recommended that you first prime with
Product #899 Primer.
- Epoxy.com Product #315BC -
Fast Same as Product #315BCPolymeric
Coating for Base Coat for the
315Chip Flooring System, but with a fast cure.
-
Epoxy.com Product #315BC-Cold Similar to Product #315BC
Polymeric Coating for Base Coat for the
315Chip Flooring System, but with a cold temperature cure.
-
Epoxy.com #315NH Epoxy Floor Coating is a 100%solids,
moisture-insensitive epoxy coating. Epoxy.com #315NH
Epoxy Floor Coating mixed at 2 :1 by volume ratio, produces an
excellent coating for dry or damp concrete, wood, or steel surfaces.Epoxy.com
#315NH Epoxy Floor Coating is available in a summer grade
and winter grade formulation. It can be used as a stand alone
coating or as a base coat for Epoxy.com Chip Flooring System. It can
also be used to replace Epoxy.com Product #315BC
Polymeric Coating when a non-hazmat to ship basecoat is required.
-
Epoxy.com Product #316 Fast Set Flooring - a 100 % solids
fast setting two-component epoxy resin system. Is made to set fast even
in temperatures below freezing. It is recommended for flooring,
injection or anchor-bolt grouting in the neat state or as a mortar when
mixed Epoxy.com Product #75 Filler. It exceeds most
requirements of ASTM C-881-99, Types I and IV , Grade 1, Class A.
|
|
Proper mixing and installation is critical to the optimal success
of all product. See
Installation Tips,
Techdata, &
MSDS for more details on our products.
Be sure to contact us with any questions and/or concerns that you
have.
For more information please contact:
Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over
350 products,
Since 1980
Florida & Vermont
USA
Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch
321-206-1833 Customer Service - Ordering and Order Status
Katey Fontaine, VP - Customer Service Director
sales@epoxy.com
Technical Support
352-533-2167 Norm Lambert, President - Technical Support Director
info@epoxy.com
352-489-1666 Accounting and Administration
Debby Lambert, CEO, and CFO
office@epoxy.com
352-489-1625 Fax line to all Departments
www.epoxy.com
24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
| We accept MasterCard, Visa, American Express, Discover,
or Wire Transfers. |
Copyright © 1994-2012 EPOXY.COM
a division of Epoxy Systems, Inc. -
Florida and Vermont. All rights reserved.
Unless
other wise agreed upon in writing, buyer is responsible for the cost of
shipping.
This
information is presented in good faith to assist in determining whether this
product is suitable for application. No warranty or representation, however, is
intended or made, nor is protection from any law or patent to be inferred, and
all patent rights reserved.
Epoxy.com a
division of Epoxy Systems, Inc. warrants its products (when
properly stored) for the period of time as follows: Epoxies, Product
#315, Product #315BC, and Product #316 one (1) year; Polyesters,
Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months;
Power Tools and Equipment 90 days; Vinyl Esters, and all other
resins (not specifically mentioned above) 30 days; hand tools
(non-power tools) 30 days. Epoxy.com warrants that its
products will be free of manufacturing defects and will be in
conformity with published specifications when handled, stored, mixed
and applied in accordance with recommendations of Epoxy.com. If any
product fails to meet this warranty, the liability of Epoxy.com will
be limited to replacement of any non-conforming material if notice
of such non-conformity is given to Epoxy.com within the warranty
period for the material (as indicated above), or within 1 year of
the delivery of materials (whichever is sooner). Epoxy.com may in
its discretion refund the price received by Epoxy.com in lieu of
replacing the material. No customer, distributor, or representative
of Epoxy.com is authorized to change or modify the published
specifications of this warranty in any way. No one is authorized to
make oral warranties on behalf of Epoxy.com. In order to obtain
replacement or refund the customer must provide written notice
containing full details of the non-conformity. Epoxy.com reserves
the right to inspect the non-conforming material prior to
replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE
ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE
OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL
HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD
PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER
DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All
quotes and sales subject to availability.
Many of our
products are made on an individual order basis. Unless
authorized in writing by Epoxy.com a division of Epoxy Systems, Inc.
in writing before the material is made, there are no returns on
items purchased from us, once the order has been processed, and the
material made. In the event of authorized returns a restocking
charge will be charged in the amount of 30% of the value of the
material returned or $150 whichever is greater. No returns on
non-list priced items. All Returns are for merchandise (store)
credit only, no cash or credit card credits. In the event of a
return, buyer is responsible for the cost of shipping and handling
in both directions.
[Tech Data Sheets in Acrobat Format]
[MSDS in Acrobat Format]
[Online Ordering Authorization Form]
[Add this page to Favorites]
5875076
|