Epoxy.com Coating Systems

[Home] [Catalog of Products] [Where to Start] [[Bonding Systems] [Chip Floors] [Chemical Resistance] [Coatings] [Conductive Flooring] [Applications] [Elastomeric Polyurethane Systems] [Epoxy Resin Systems] [Seamless Garage Floors] [High Temperature Epoxy] [Industrial Floors] [Injection] [Joint Systems / Sealants] [ Methyl Methacrylate (MMA)] [Mortars / Grouts] [Novolac Epoxy] [Polymer Systems] [Primers Sealers] [Misc.] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Installation Tips] [Product Guide] [Wood Filler] [Who We Are] [Guide Specs] [Tech Data Sheets in Acrobat Format] [MSDS in Acrobat Format] [Online Ordering Authorization Form]  [Add this page to Favorites]

 
Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980

Epoxy.com Heavy Duty Industrial Epoxy and Urethane Coating Resin Systems

Here are listing of Epoxy.com epoxy coatings and urethane coatings. The Epoxy.com Products listed below are either pigmented or available in pigmented.  Related products not specifically covered below are Primers and Sealers, and  Flooring and Decking Systems

General Purpose 100% Solids "0" VOC Epoxy Coatings
100% Solids Heavy Duty Industrial Floor Coatings
Fast Setting Epoxy and Low Temperature Cure Epoxy
Chemical Resistant Epoxy - Novolac
Chemical Resistant Epoxy - other
High Temperature Epoxy
High Temperature High Chemical Resistant Epoxy
Coal Tar Epoxy Coatings
Conductive Epoxy and Conductive Urethane Coatings
Polyurethane Coatings -non conductive
Solvented Coatings
Water Based Coatings
Polyurea Coatings
Specialty Epoxy Coatings - Epoxy Coatings that don't fit into the above categories
Coating Calculator - Calculate how much Epoxy.com coating you will need for your job.

100% Solids Zero "0" VOC Epoxy Coatings

General Purpose  Heavy Duty Industrial Floor Coatings

  • Epoxy.com Product #1 All Purpose Coating  is a 100% solids epoxy Hi-Build epoxy coating used for high foot and light forklift traffic areas where abrasion resistance is required; for protection against mild corrosion; and as a decorative waterproof coating for walls, floors, tanks, etc . Also available fast, and Cold Temperature Cure versions. Zero (0) VOC Epoxy.
  • Epoxy.com Product #1W is a two component, 100% solids epoxy Hi-Build epoxy coating used for high indoor traffic areas where abrasion resistance is required; for protection against mild corrosion; and as a decorative waterproof coating for walls, tanks, etc. Zero (0) VOC Epoxy.
  • Epoxy.com Product #2W Chemical Resistant Wall Coating   is a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkalines for both interior and exterior applications. Zero (0) VOC Epoxy.

Solvented Coatings

Water Based Coatings

Polyurea Coatings

Fast Cure Epoxy and Low Temperature Cure Epoxy

  • Epoxy.com Product #1 Fast  - is a shorter potlife, and faster setting version of Epoxy.com Product #1, Zero (0) VOC Epoxy.
  • Epoxy.com Product #1 Cold Temperature Cure  is a version of Epoxy.com Product #1 that sets even faster than Product#1 Fast.  Typically used in colder temperatures, or where an very fast cure is required. Zero (0) VOC Epoxy.
  • Epoxy.com Product #2 Fast  is a  shorter potlife, and faster setting version of Product #2 Zero (0) VOC Epoxy.
  • Epoxy.com Product #2 Cold Temperature Cure & is a version of that sets even faster than Epoxy.com Product#2 Fast Cure.  Typically used in colder temperatures, or where an very fast cure is required. Zero (0) VOC Epoxy.
  • Epoxy.com Product #204 Cold Temperature Cure Polymeric Coating -   is a specially formulated coating for cold temperature applications. Able to cure at temperatures as low as 35°F. It is often used in coolers and food preparation areas that require constant low temperatures. It is also frequently used in room temperature applications to meet super-fast cure, limited shutdown needs. Zero (0) VOC Epoxy.

Chemical Resistant Novolac Epoxy

Chemical Resistant Epoxy -Other

High Temperature Epoxy

High Temperature High Chemical Resistant Epoxy

Coal Tar Epoxy Coatings

  • Epoxy.com Product #210 Coal Tar Epoxy is a two component, 100% Solids coating especially formulated for high build applications. It produces a tough, flexible, chemical and impact resistant film.  Epoxy.com Product #210 Coal Tar Epoxy is formulated to be easily spray applied as thick as 40 mils in 1 coat.  It provides excellent resistance to aggressive water, acids, and caustics. Suitable for intermittent exposure to 300° F. Zero (0) VOC Epoxy.
  • Epoxy.com Product #216 Coal Tar Epoxy  is a two component coal tar epoxy coating, black in color, used to protect steel, concrete structures, timber, and other construction materials in corrosive environments. It meets all requirements of Corp. of Engineers C-200, Federal Specification DOD-P-23236 (SHIPS), and SSPC 16-91.

Conductive Epoxy Coatings

Polyurethane Coatings

  • Product #403 Urethane Coating Aliphatic

Specialty Coatings - Not listed above

Skip Navigation Links

Epoxy.com Home PageExpand Epoxy.com Home Page

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 350 products,
Since 1980
Florida & Vermont
USA

Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch

321-206-1833  Customer Service - Ordering and Order Status
                         Katey Fontaine, VP - Customer Service Director
                         sales@epoxy.com

                        Technical Support
352-533-2167  Norm Lambert, President - Technical Support Director 
                         info@epoxy.com

352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO
                         office@epoxy.com

352-489-1625   Fax line to all Departments
                          www.epoxy.com

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Copyright © 1994-2013 EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

Epoxy.com a division of Epoxy Systems, Inc.  warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months;  Power Tools and Equipment 90 days; Vinyl Esters,  and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days.   Epoxy.com warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Epoxy.com. If any product fails to meet this warranty, the liability of Epoxy.com will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Epoxy.com within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Epoxy.com may in its discretion refund the price received by Epoxy.com in lieu of replacing the material. No customer, distributor, or representative of Epoxy.com is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Epoxy.com. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Epoxy.com reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com  SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are made on an individual order basis.   Unless authorized in writing by Epoxy.com a division of Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.

[Home] [Catalog of Products] [Where to Start] [[Bonding Systems] [Chip Floors] [Chemical Resistance] [Coatings] [Conductive Flooring] [Applications] [Elastomeric Polyurethane Systems] [Epoxy Resin Systems] [Seamless Garage Floors] [High Temperature Epoxy] [Industrial Floors] [Injection] [Joint Systems / Sealants] [Methyl Methacrylate (MMA)] [Mortars / Grouts] [Novolac Epoxy] [Polymer Systems] [Primers Sealers] [Misc.] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Installation Tips] [Product Guide] [Wood Filler] [Who We Are] [Guide Specs] [Tech Data Sheets in Acrobat Format] [MSDS in Acrobat Format] [Online Ordering Authorization Form] [Add this page to Favorites]

6477966