A Clear, non-yellowing protective coating
Epoxy.com Product #80
ACRYLIC SEALER Product #80 (formerly known as Epoxy.com Product
#239) is a clear acrylic solution formulated to create
a clear, non-yellowing protective coating.
Product #80 ACRYLIC SEALER
provides a tough, UV and abrasion resistant film that effectively protects surfaces from
moisture penetration, staining, dirt, dust, and wear. Providing a surface that is easy to
clean and maintain, Epoxy.com Product #80 ACRYLIC SEALER is an excellent choice for
both interior and exterior applications.
Epoxy.com Product #80 ACRYLIC SEALER is most commonly used as a sealer for
Epoxy.com Epoxy Terrazzo and Epoxy.com Polymeric Terrazzo
flooring systems. It is also used for sealing old and new concrete floors,
Concrete Countertops, exterior ramps,
decks, sidewalks, slate, and exposed aggregate surfaces.
- UV resistant
- Excellent clarity and color retention
- Low maintenance finish
- Excellent abrasion and mar resistance
- Seals substrate from moisture penetration
- Do not apply below 50°F
- Contains solvent. Keep from ignition sources
- Must be applied with proper ventilation
Prepare surface in accordance with Epoxy.com, Technical Bulletins. New
concrete must be cured at least 30 days. All concrete curing compound must be mechanically
removed, along with any foreign material Old concrete must be structurally sound and
prepped according to guidelines.
Epoxy.com Product #80 ACRYLIC SEALER is a single component acrylic solution. Stir
material in container prior to application. Do not reduce.
Apply by roller, brush, or applicator pad. Spread at an even rate between 300 and 500
square feet per gallon. Two coats are recommended for sealing applications.
Re-coat in 2 to 4 hours at 700F with 50% RH. Low temperatures or high
humidity may significantly increase cure time. Do not open to light traffic for at least
24 hours after application
Clean tools with Xylene or lacquer thinner.
|Mixing Ratio, by volume
|Solids Content, by volume
|Weight per Gallon, mixed
After completing the application of Epoxy.com Product #80 ACRYLIC SEALER, the
installer should provide the owner with maintenance instructions. If floors become
slippery due to animal fats, oil, grease, or soap film, promptly remove contaminants and
Epoxy.com Product #80 ACRYLIC SEALER is easily cleaned with neutral soaps or
detergents. Routine mechanical scrubbing is recommended for all surfaces having a non-skid
texture. Waxing is optional. Long periods of heavy traffic may cause wear patterns
necessitating a maintenance application of a finish coat.
Epoxy.com, Inc. provides services and consultations on material selection,
specification, troubleshooting, and other information on the proper repair and protection
of concrete surfaces.Epoxy.com REPRESENTATIVES are available to assist you at 352-533-2167