Epoxy.com Product #231 Water Emulsion Epoxy Primer and Epoxy Sealer

Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980
[Contact Us]

Epoxy Water Emulsion Primer and Sealer

Epoxy.com Proudct #231


Epoxy.com Product #231 Water Emulsion Primer and Sealer   is a water based epoxy primer/sealer designed to have maximum resin penetration into concrete surfaces to provide high bond strength and adhesion. Epoxy.com Product #231 Water Emulsion Primer and Sealer   has very low odor and, therefore, can be used in occupied areas. Epoxy.com Product #231 Water Emulsion Primer and Sealer   has the ability to be applied to recently poured (green) concrete and achieve excellent adhesion. Epoxy.com Product #231 Water Emulsion Primer and Sealer   is ideal for both new and old concrete surfaces.  It is used as a primer for Epoxy.com High Build and Thin Film Coating Systems.


  • Very little odor during application.
  • Easy clean-up.
  • Fast dry and recoat time.
  • Can be used on damp/green concrete.
  • Greatly reduces probability of concrete outgassing.


  • Substrate must be above 50°F and relative humidity below 85% for proper curing.
  • Substrate must be free of dirt, waxes, curing agents and other foreign materials.


Water-borne epoxy resin.


Clean tools with xylene, lacquer thinner, or hot soapy water.


300 sq ft / gallon

2.0 DFT



Surface Preparation is the most critical portion of any successful resinous flooring system application. All substrates must be properly prepared as outlined in Epoxy.com Surface Preparation Guide.


Mix each component of Epoxy.com Product #231 Water Emulsion Primer and Sealer prior to combining in the proper mixing ratio, (2 parts Part A-Resin to 1 part Part B-Hardener by volume).  Only mix what can be used in four hours. Allow to stand 30 minutes and mix again.

Apply primer in a thin film with a short nap roller (1/4 inch nap). Do not build film of the primer, but roll out so that it soaks into the concrete. Two coats of primer may be necessary to insure uniform wetting and coverage. Second coat can be applied over wet primer after turning from cloudy to clear.


Epoxy.com Product #231 Water Emulsion Primer and Sealer can be top coated very rapidly. When primer turns clear (from milky), it is possible to apply a water based topcoat. Follow the following recoat windows:

Water based topcoat - 1-24 hours

100% solid epoxy topcoat - 6-24 hours

Solvent based topcoat - 24-36 hours


Mixing Ratio, by volume

2 parts A to 1 part B

Solids Content, by volume



<60 gm/L

Weight per Gallon, mixed

8.84 pounds

Bond strength to concrete

400-500 psi

Tensile Pull, psi

100% concrete failure


Pot Life

> 3 hours

Dry to touch

4-6 hours


6-24 hours minimum

Light Traffic

24 hours minimum

"H" Hardness
"5-H" Hardness

2 days
30 days


Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Hundreds of Systems,
Since 1980 - 35 years
Florida & Vermont

Customer and Technical Support Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12 Noon-1PM Eastern Time for Lunch

321-206-1833  Customer Service - Ordering and Order Status
                         Katey Fontaine, VP - Customer Service Director

                        Technical Support
352-533-2167  Norm Lambert, President - Technical Support Director 

352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO

352-489-1625   Fax line to all Departments

Get important hint, tips, tricks, and product information:  Visit our Blog, and join us on Facebook and Twitter.

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks

Copyright © 1994-2017 - Epoxy Systems Inc. DBA Epoxy.com  - Commercial, Industrial, and Residential Resins Since 1980