Methyl Methacrylate (MMA)
Methyl Methacrylate (MMA) Horizontal Concrete
Repair and Patching Resins
Methyl Methacrylate (MMA) repair and patching resins for vertical
surfaces, can be placed very economically. Surfaces repaired with
our MMA Systems can be opened to traffic quickly (typically in two hours or less), dramatically reducing turn around time and the
inconvenience
associated with the longer down time of other materials .
Methyl Methacrylate Patch Kit
Methyl Methacrylate Pigment Patch Kit contains everything you need to patch your floor and have traffic on it again within 1.5 hours of placing the patch. Methyl Methacrylate
Patch Kit contains Products # 691 MMA Primer,
Product #698 MMA Mortar
Resin, #694 MMA Pigment Pack, #695 MMA Hardener, and #82 Blended Mortar
aggregate. You no longer have to order all of these products individually in
bulk. It can all be shipped and stored in 1 pail.
Methyl Methacrylate in Larger Packaging
Product #680 Methyl Methacrylate (MMA) Polymer Concrete is a Polymer Concrete methyl methacrylate (MMA) reactive resin is used as a binder to
develop polymer concrete which produces extremely high strength and chemical resistance with an abrasion resistant surface. It is prepackaged and
preproportioned for easy mixing and placing at the job site. The liquid polymer and the preproportioned hardener filler is mixed either in the
polyethylene bag or in a mortar mixer. Epoxy.com Product #680 Methyl Methacrylate (MMA) Polymer Concrete
comes in convenient 1/2 cubic foot packaging. That makes Product #680 the perfect choice for small to medium patching jobs where a fast setting material
is required. If you do not need a fast setting material,
Epoxy.com Product #25 Epoxy Mortar Kit is an excellent alternative.
Product #681 MMA Primer for
MMA Polymer Concrete. For use exclusively with
Product #680 Methyl Methacrylate (MMA) Polymer Concrete
Product #685
MMA Crack Healer and Sealer is for injection repair or as a
penetrating crack repair and sealer on concrete. It is a two component Methyl
Methacrylate resin system that polymerizes in place. The extremely low viscosity
will penetrate into concrete cracks as fine as 0.003 inches.
This is an excellent cost effective substitution for Epoxy injection an a
level horizontal Surface. Use
Epoxy.com Epoxy Injection for structural cracks in vertical
surfaces.
Methyl Methacrylate (MMA) Floor and Wall Coating, Flooring and Decking Systems
Methyl Methacrylate (MMA)
Seamless Flooring and Seamless Decking Systems may be installed
on most surfaces, including old or new concrete, wood, and metal. Our Methyl Methacrylate (MMA)
Seamless Flooring and Decking Systems are waterproof. Our Methyl Methacrylate Flooring Systems can be used as a solid color,
with colored quartz, or our Flooring Chips.Our Product #692 Flexible Methacrylate can be used for crack isolation and waterproofing where movement is anticipated.
Our Methyl Methacrylate (MMA)
Seamless Flooring and Seamless Decking Systems are very easy and fast
to install. They can even be installed at temperatures down to -22°F allowing
them to be used in Freezer Rooms and extend the installation season for outside
seamless decking and seamless flooring applications. Our Methyl
Methacrylate (MMA) Flooring and Decking Systems are wear-resistant, shock absorbing
(impact resistant) and can take full traffic and loads within 2 hours of installation.
Product #690 Medium Viscosity Methyl Methacrylate (MMA) Sealer and Top Coating
is a 100% reactive, medium viscosity methyl methacrylate resin developed as
a sealer/topcoat over Product #697
and Product #698 Methyl Methacrylate (MMA) Flooring and Decking Systems.
Product #691 Methyl Methacrylate (MMA)
Primer is a 100% reactive Methyl Methacrylate
primer for all Epoxy.com MMA floor and wall systems.
Product #691 Methyl Methacrylate (MMA) Flooring Primer also provides
excellent filling and sealing as a scratch work filler (with filler added) to
level uneven floor and wall surfaces. Product #691 Methyl
Methacrylate (MMA) Flooring Primer is a reactive Methyl Methacrylate
resin, which hardens rapidly with the addition of
Product #695 MMA hardener, even at low temperatures.
Product #692
Flexible MMA
Membrane is a Flexible Methyl Methacrylate (MMA) Flooring,
Decking Bridge Mortar Resin is a higher viscosity, 100% reactive, flexible
(up to 300% elongation) Methyl Methacrylate resin used as a crack isolation
or waterproofing membrane under Product
#697 Methyl Methacrylate (MMA) Based Resin Systems. Product #692 Flexible Methyl Methacrylate (MMA) resists cracking caused by
horizontal substrate movement providing a crack resistant, resilient
surface. Product #692 Flexible Methyl Methacrylate (MMA) offers
stress relieving properties for floor slabs showing movement and/or
vibration. It may also be used by itself when maximum flexibility of the entire system is
required. When used by itself
Product #692 MMA
Membrane must be sealed with
Product #693
Semi-Flexible MMA
Coating.
Product #693
Semi-Flexible MMA
Coating is a 100% reactive, medium viscosity methyl
methacrylate resin developed as a topcoat for exterior or interior use with
Product #692
Flexible MMA
Membrane based Systems. Product #695 Methyl Methacrylate (MMA)
Coating is semi-flexible designed primarily for outside use and will not yellow after curing.
Its excellent clarity makes it ideal for sealing color quartz and vinyl
flake systems. It is excellent for exterior applications such as parking
decks, concrete and steel stairs, ramps, solid wooden decks, concrete
and patios as well as numerous other applications.
Product #694 Pigment Packs for use in all of our Methyl
Methacrylate Products #690 - Product #699, and for use in our Products that are available in a neutral tint base. Available in
15 colors plus black and white.
Product #695 Hardener Powder (BPO)
for Methyl Methacrylate (MMA) Flooring Systems is for use with Products #691 Methyl Methacrylate (MMA) Primer, #692 Flexible Methyl Methacrylate (MMA) Membrane and #693 Semi-Flexible Methyl Methacrylate (MMA).
Epoxy.com Product #695 Hardener Powder (BPO) for our MMA Flooring
Systems dosing can be changed due to temperature and desired set time /
working time. Product #695 must be well mixed with the Methyl Methacrylate (MMA)
before adding any other aggregates and fillers. After mixing the
Product #695 MMA Hardening Powder into our MMA the
polymerization reaction which leads to the hardening of the MMA begins.
Product #697 Methyl Methacrylate (MMA) Binder Resin - a 100% reactive methyl methacrylate binder resin and top coat for self leveling, broadcasting, and troweled mortar systems.
Product #697 Methyl Methacrylate (MMA) Binder Resin is ideal for decorative troweled and broadcast quartz floors and industrial surfacing subject to heavy loads and traffic.
Typical thickness of this system is between 1/8 inch and 1/4 inch thick.
Product #698 Methyl Methacrylate (MMA) Binder Resin is a 100% reactive, low viscosity, flexible methyl methacrylate resin for use as a binder for low resin content troweled mortars and polymer concrete.
The resin is ideal for making repairs and to change the slope on floors, bridge decks and joint headers.
Product #698 Methyl Methacrylate (MMA) Binder Resin
can be installed as thick as 2.5 inches in one operation.
Product #699 Low Viscosity Methyl Methacrylate (MMA) Sealer is a 100% reactive, low viscosity methyl methacrylate resin developed as a chemical resistant sealer/topcoat.
Product #699 Low Viscosity Methyl Methacrylate (MMA) Sealer cures to a hard, scratch and wear resistant surface and is specifically designed for dry service in areas subjected to high traffic
such as manufacturing areas, aisles, lobbies, service areas, and numerous other applications.
Product #699 Low Viscosity Methyl Methacrylate (MMA) Sealer is used as a sealer for
Product #697 and
Product #698 Methyl Methacrylate (MMA) Binder Resin
Systems .
See also:
