Epoxy Polyurethane Polyester MMA - Methyl Methacrylate, other Resin Systems Over 350 Products Since 1980 Contact Us

Epoxy.com Products #67 and #68

Decorative Colored Silica

All Epoxy.com Colored Aggregates use a pure silica sand as the basic mineral. Silica is an extremely hard abrasion resistant and chemically inert mineral, ideal for use in conditions that - at times - may be severe. Flooring surfaces produced with high density silica combined with Industrial Flooring Resins produced by Epoxy.com. consistently show greater resistance to wear than surfaces filled with minerals or many other resins or binders.


A unique feature of Epoxy.com Products #67 and #68 is that each grain is highly translucent. Since the color is transmitted through the particle as well as reflected from the surface, flooring surfaces made with Epoxy.com Colored Sands can often be easily restored to nearly their original appearance after years of hard wear and abuse, with the application of a clear top-coating.

Density and Coverage Data

The density of Epoxy.com Colored Sands average about 90 lbs. per cubic foot. Of course, coverage varies depending on the thickness of the anticipated surface.

Here is an easy formula to use when calculating the weight of Epoxy.com Colored Sands needed to cover a given area.

(Square Footage to be covered) times (Thickness in inches, i.e. 1/4)x 7.5 = (lbs. of aggregate required)


Epoxy.com Colored Sands are ideally suited to any established method of application; troweling, or broadcast. Traditionally rounded grain sand have been thought the best suited for broadcast applications. However, even though the broadcast line of Epoxy.com Colored Sands suggests this method of application, experienced applicators find they have no difficulty troweling this type of aggregate.

Similarly the trawled line of Epoxy.com Colored Sands are not limited to the trowel method of application. All three grades work well in all systems.

It is the combination of sizes and colors that the compounder will discover the excitement of achieving a wide variety of effects. For example, the finer grain broadcast sand may be used in combination with the coarser Trowel System sands to create the effect of a smooth velvety "field" color with the courser grains used as accent colors.

Click the color chart below to view a full size view of the standard colors available.

Epoxy Quartz Color Quartz

Technical Data

Screen Specifications (Typical

Mesh Trowel System Sands
% Retained
Broadcast (Medium)
% Retained
Broadcast (fine)
% Retained
16 12.9 -- --
20 20.1 9.0 --
30 55.1 13.0 0.3
40 11.2 56.5 6.1
50 0.7 24.4 27.2
70 -- 2.1 40.0
100 -- 1.0 22.4
140 -- 00 4.0
-140 trace trace 0.2

Chemical Analysis

SiO2 99.808%
Fe2 0.016%
A12O3 0.042%
Ca O& Mg O 0.2%
Loss on ignition 0.10%

For more information please contact:

A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Hundreds of Systems ,
Since 1980 - Over 33 years
Florida & Vermont

Customer and Technical Support Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time) .
Closed 12 Noon-1PM Eastern Time for Lunch

321-206-1833  Customer Service - Ordering and Order Status
                         Katey Fontaine, VP - Customer Service Director

                        Technical Support
352-533-2167  Norm Lambert, President - Technical Support Director 

352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO

352-489-1625   Fax line to all Departments

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Copyright © 1994-2015 EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.