Epoxy.com SELF LEVELING FLOORING/SELF LEVELING BROADCAST FLOORING consist of 100% solids epoxy and aggregates producing a fluid, self-leveling mixture that can be spread with a V-notched squeegee or trowel. These systems are the answer for both new construction and renovated areas, and can be installed over most sound floors.

CHEMICAL RESISTANCE: Epoxy.com  Self Leveling FLOORING/Self Leveling Broadcast FLOORING can be made chemical resistant with HIGH PERFORMANCE (HP) finish coat(s). For specific information, consult Epoxy.com  TECH SERVICE DEPARTMENT for best choice.

Epoxy.com  SELF LEVELING FLOORING, when cured, produces a dense, non-porous floor that is chemical and dirt resistant. Epoxy.com  SELF LEVELING FLOORING is a seamless, low maintenance system exhibiting high wear and durability for light to medium traffic areas. Epoxy.com  SELF LEVELING FLOORING may be sealed with a top coat to further enhance abrasion resistance, gloss retention, and non-skid properties.

Epoxy.com  SELF LEVELING FLOORING is a broadcast system of selected aggregates. The slurry system is a seamless, low maintenance system exhibiting high wear, durability, and impact resistance for medium traffic areas. To fill in pores and secure the aggregate, a second epoxy coating is applied producing a textured, skid resistant floor. Epoxy.com  SELF LEVELING FLOORING’s textured finish is chemical and dirt resistant.

Epoxy.com  SELF LEVELING FLOORING can include Epoxy.com  WATERPROOFING MEMBRANES, producing a waterproof, crack resistant system. An integral cove base can be installed in areas requiring seamless wall to floor coatings.

• Activity Centers
• Aircraft Hangars
• Airports - Baggage/Service
• Animal Areas - Housing
• Cage Washing
• Beverage - Processing
• Packaging/Warehousing
• Bottling
• Cafeterias
• Chemical Processing
• Clean Rooms
• Coolers
• Correctional Facilities
• Corridors
• Decks/Ramps
• Dairies
• Distilleries - Packaging
• Food Processing
• Food Preparation and Service
• Garages - Service
• Laboratories
• Laundries
• Locker Rooms
• Machine Shops
• Manufacturing
• Mechanical Equipment Rooms
• Pharmaceutical Plants
• Pulp and Paper Processing Facilities
• Showers
• Utilities
• Warehouses
• Waste Water Treatment Facilities

Flammability ASTM D-635                Self Extinguishing

Fungus & Bacteria Resistance MIL-F-52505 §4.4.2.11: Will not support growth of fungus or bacteria when subjected to mildew and bacteria tests specified in TTP34

Adhesive Strength MIL-D-24613        420 p.s.i

Hardness ASTM-D-2240 Shore D        80-84

Water Absorption
MIL-D-24613                                  Nil

Thermal Shock Resistance
ASTM-C-884                                Passes

Abrasion Resistance
ASTM-C-501                                32 mg

Compressive Strength 
ASTM-C-579, 7 days, p.s.i                11,500

Tensile Strength ASTM-C-307, p.s.i    2,400

Flexural Strength ASTM-C-580, p.s.i    4,300

Coefficient of Friction
ASTM-D-2047                                0.80

Compressive Strength 
ASTM-D-695, p.s.i                            13 000

Ultimate Tensile Strength 
ASTM-D-638, p.s.i                            4,200

Tensile Elongation
ASTM-D-638, %                             6-8

Flexural Strength ASTM-D-790, p.s.i    7800

Flexural Modulus ASTM-D-790, p.s.i    2.5 x 10⁵

Epoxy.com  SELF LEVELING  FLOORING can include an integral cove base in areas requiring seamless wall to floor coatings.

Epoxy.com  SELF LEVELING FLOORING and SELF LEVELING BROADCAST FLOORING are composed of 100% solids epoxy resin filled with a variety of graded quartz, silica, or ceramic fillers that can be modified to create the best design mix for ideal performance. A wide selection of finish coats is available for varying exposure requirements.

• Substrate must be above 50°F during application.

• Substrate must be free of hydrostatic pressure, moisture transmission, paint, curing agents, and other foreign materials.

• Areas of thermal shock require minimum 1/16 inch systems.

• Urethane finish coats are recommended for areas exposed to intense sunlight.

Surface Preparation is the most critical portion of any successful resinous flooring system application. All substrates must be properly prepared as outlined by EpoxySystems. Work must be performed by trained or experienced contractors or maintenance personnel. The Epoxy.com Technical Service Department is pleased to answer any questions.

APPLICATION:

• Prime Coat

• Slurry coat/Broadcast (Epoxy.com  SELF LEVELING FLOORING).

• Grout (Epoxy.com  SELF LEVELING FLOORING).

• Finish coat(s) as needed for correct finish, texture, and appearance.

• 8-16 hours after application of seal coat for light traffic.

• 24-36 hours after application of seal coat for heavy traffic.

All tools and equipment should be cleaned before materials gel. Use Xylene or lacquer solvent.

 

Epoxy.com  Self Leveling FLOORING/Self Leveling Broadcast FLOORING is available in a variety of standard colors. Custom colors are available subject to laboratory approvals, minimum quantities, lead time for production, and increased cost. Epoxy.com  TECH SERVICE DEPARTMENT are ready to assist.

CAUTION:

WARNING! A Component contains epoxy resin. B Component contains alkaline amines; strong sensitizer. May cause skin sensitization or other allergic responses. Use with good ventilation, particularly if material is heated or sprayed. Prevent all contact with eyes or skin. Wear protective clothing, goggles, gloves, and/or barrier creams. Keep container closed when not in use. Wash thoroughly after handling.

Please look for our logo on all our product labels.
If it does not have this logo on it, it is not an Epoxy.com Product.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc.
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Hundreds of Systems ,
Since 1980 - Over 37 years
Florida & Vermont
USA

Customer and Technical Support Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time) .
Closed 12 Noon-1PM Eastern Time for Lunch.

321-206-1833  Customer Service - Ordering and Order Status
                         Katey Fontaine, VP - Customer Service Director
                         sales@epoxy.com

                        Technical Support
352-533-2167  Norm Lambert, President - Technical Support Director 
                         info@epoxy.com

352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO
                         office@epoxy.com

352-489-1625   Fax line to all Departments

We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Copyright © 1994-2019 ( providing online information about the right product for the right job for over 23 years)  EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.