- Product #10 Lo-Mod Adhesive
- a 100% solids Lo-Mod Low Viscosity adhesive used as a binder for epoxy
mortar systems in patching and grouting applications, as a seal coat for
non-skid surfaces outside, and as a primer to insure high bond strength for
coatings and patches. Available in Normal Fast and Cold Cure.
- Product #12 Epoxy Primer
- a two component, seamless 100% solids epoxy primer system with High
Chemical Resistance and High Bond Strength. The epoxy may be applied as a
primer for most High End Industrial coatings, like Epoxies, MMA,
Polyurethane's, Vinyl Esters, Polyesters, etc.
- Product #15 Chemical Resistant
Flooring Resin - a two component, seamless 100% solids epoxy resurfacing
system with High Chemical Resistance. It may be applied as a coating, or
combined with silica sand or Epoxy.com multi-colored quartz aggregate to
produce a durable, easy to maintain floor, on both new and old surfaces.
- Product #17 Decorative Stone
Overlays - a two component, 100% solids high-mod epoxy adhesive
used for bonding stone and other aggregates in all types of flooring
applications. Some uses would include patios, pool decks, walkways and other
areas where a long wearing and decorative system is desired.
- Product #19 Epoxy Mortar -
a multi-function liquid applied, 100% solids epoxy binder and mortar
system with excellent wear, and chemical resistance. Product #19 is an
excellent general purpose material with excellent clarity and color
retention. It is essentially odorless and so it can be used in occupied
areas.
- 24 Pigmented Mortar
- is a multipurpose colored epoxy binder for
Epoxy.com Mortar Systems This all purpose epoxy resin is characterized
as an excellent general purpose material with good clarity and color
retention. It is essentially odorless and can therefore be used in occupied
areas. Available in Normal, Fast, and Cold Temperature Cure.
- 28 Epoxy Mortar - Honey
Clear Mortar 4:1 Ratio a multipurpose colored epoxy binder for Epoxy.com
Mortar Systems This all purpose epoxy resin is characterized as an excellent
general purpose material with good clarity and color retention. It is
essentially odorless and can therefore be used in occupied areas.
- Product #224
Water Cleanable Epoxy Mortar Resin
is a user friendly, water cleanable, 100% solids
epoxy grout and adhesive. Used for grouting ceramic tile, brick pavers, and
stone, it is supplied in pre-packaged kits containing resin, hardener, and
(in the Product #225 Kit) mineral fillers that produce a dense, uniform
seal. Typical applications for #224 require resistance to thermal shock,
chemicals, and heavy traffic including meat packers, breweries, canneries,
bottlers, CIP areas, and pharmaceutical formulators.
- Product #225
Water Cleanable Epoxy Mortar Kit - includes
Product #224 along with the aggregate. Mix the three components
together for a ready to use system.
- 630 Novolac Coating -
Mortar Binder- a 100% solids epoxy Novolac ideal
for harsh chemical and solvent resistant applications. It is ideal for use
as a troweled mortar, slurry binder, and coating for concrete and steel in
extremely corrosive areas where resistance to 98% sulfuric acid or other
strong caustics is needed. It
is ideal for use as a protective coating for concrete and
steel in the extremely corrosive areas of chemical plants and pulp mills
secondary containment areas, water and waste treatment, and gas and electric
utilities.
- Product #633
Novolac Coating is a 100% solids epoxy Novolac coating ideal for
harsh chemical and solvent resistant applications.
Itis used in secondary
containment, solvent storage, pump pads, trenches, and other high exposure
areas. Itis ideal for use as a protective coating for concrete and steel in
the extremely corrosive areas of chemical plants and pulp mills secondary
containment areas, water and waste treatment, and gas and electric
utilities. Product #633 is commonly used as a seal coat for
Epoxy.com MORTAR SYSTEMS where chemical resistant
performance is required.
Other Products of Interest