Epoxy.com Product #899 Cold Cure

Cold Temperature Cure Epoxy Primer Resin

DESCRIPTION

Epoxy.com Product #899 Cold Temperature Cure Epoxy PRIMER resin is a specially formulated primer for cold temperature applications. Able to cure at temperatures as low as 35°F. They are often used in coolers and food preparation areas that require constant low temperatures. Epoxy.com Product #899 is frequently used in room temperature applications to meet super-fast cure, limited shutdown needs.

Coating Installation Guide

Coatings Calculator

ADVANTAGES

CONSIDERATIONS

COMPOSITION

100% Solids Epoxy Resins, and Epoxy Hardeners

APPLICATION

SURFACE PREPARATION
Surface Preparation is the most critical portion of any successful resinous flooring system application. All substrates must be properly prepared. For more information, Contact Epoxy.com Technical Service Department.

INSTALLATION

Epoxy.com Product #899 Cold Temperature Cure PRIMER is normally spread with a notched trowel or squeegee and back-rolled with a medium or short nap roller. Care should be taken to minimize the entrapment of air caused by over-rolling.

CLEAN UP

Clean skin with soap and water. Tools and equipment should be cleaned with xylene or lacquer thinner.

COVERAGE

Epoxy.com Product #899 Cold Temperature Cure PRIMER is applied at 200-300 square feet per gallon depending on the type and condition of the substrate.

COLOR SELECTION

Honey Clear

TECHNICAL DATA

Viscosity @ 75°F  1,000 cps
Mixing Ratio 2 Parts A to 1 Part B by Volume
Solids Content 100%, by volume
Volatile Organic Content (VOC) 0
Weight per gallon 10.0-11.5 pounds per gallon, mixed

CURE/DRY TIME

Pot Life 15 minutes @ 75°F
Dry to Touch 2-3 hours @ 75°F; 14-16 hours @ 35°F
Re-Coat 3-4 hours @ 75°F; 14-16 hours @ 35°F
Light Traffic 5-6 hours @ 75°F; 24 hours @ 35°F
Full Cure & Maximum Resistance 5 days