Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980
[Contact Us]

Epoxy.com Product #467

Single Component Aliphatic Urethane Top Coating


Epoxy.com Product #467 is a single component aliphatic urethane topcoat used to seal Epoxy.com Elastomeric Urethane Decking Systems. Exhibiting excellent resistance to ultraviolet degradation, Epoxy.com Product #467 provides a high-build, chemically resistant finish.


  • Resistant to UV degradation
  • Weather resistant seal coat for exterior decking systems
  • Oil, grease, and chemical resistant
  • Single component


  • Temperature and humidity sensitive cure
  • Adequate ventilation and proper respirators are necessary when applied in close quarters
  • Minimum application temperature of 50ºF
  • Interior slab on grade installation must include a vapor barrier


Epoxy.com Product #467 is a single component, aliphatic polyurethane elastomer available in gray only. If other colors are required substitute Epoxy.com Product #402 Aliphatic Urethane.



Concrete surface must be in sound condition and properly prepared per manufacturer's recommendations. Refer to Epoxy.com Surface Preparation Guidelines.


Apply with a brush or roller.Allow to cure before applying a second coat.


DRY TIMES @ 75ºF, 50% RH

Viscosity 1500±300 cps
Solids Content 80%
VOC 222 g/liter
Weight 8.8 lbs/gallon
Coverage 100 ft²/gallon yields 12.8 mils DFT
Pot Life (77 degrees F) 60 minutes


12 hours

Light Traffic

24 hours

Vehicular Traffic

36 hours



Peel Adhesion ASTM C-794 50 pli
Abrasion Resistance ASTM-C-501 .010g loss (CS-17 wheel, 1 kg load, 1000 cycles)
Hardness, Shore A ASTM D-2240 85±5
Tensile Strength ASTM D-412 2800 psi
Elongation ASTM D-412 100%
Tear Resistance ASTM D-1004 150 pli
Chemical Resistance   No Effect – motor oil, road salt, caustic, anti-freeze, gasoline.
Weather Resistance ASTM D-822 No Visual Effect @ 2,000 hours
Permeability ASTM E-398 1.6 Perms
Fire Resistance of System ASTM E-108/UL 790 (or equal)   Class A on concrete


Standard Packaging in 5 gallon pails


Proper mixing and installation is critical to the optimal success of all products.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

A Division of Epoxy Systems, Inc
A Vermont Corporation

We have products that have passed the test of time as well as the best new Systems available today.

Since 1980 - 40 years of the highest quality products

Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time)

Closed for lunch from 12Noon to 1PM

321-206-1833  Customer Service - Ordering and Order Status
                         Katey Lambert-Fontaine, VP - Chief Operations Officer

                        Technical Support
352-533-2167  Norm Lambert, President - Technical Support Director 

352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO

Copyright © 1994-2023 (providing online information about the right product for the right job for nearly 30 years)  EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks
We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.