[Epoxy Home] [Catalog of Products] [Where to Start] [Guide Specs] [Epoxy Installation Guides] [Blog Posts] [Epoxy Bonding Systems] [Chip Floors] [Chemical Resistant Epoxy] [Seamless Coatings] [Conductive Epoxy Flooring] [Crack Injection of Concrete & Wood] [Applications] [Elastomeric Polyurethane Systems]  [Seamless Garage Flooring Resins] [High Temperature Epoxy Resins] [Seamless Industrial Floors] [Joint Systems & Sealants] [Methyl Methacrylate MMA ] [Novolac Epoxy Resins] [Epoxy Mortars & Grouts] [Epoxy Novolac] [Primers Sealers] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Epoxy Installation Tips] [Who We Are]  [Epoxy Tech Data Sheets in Acrobat] [Product MSDS Sheets] [Online Order Authorization Form][Contact UsPhone 352.489.1666

  Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980Contact Us  

Epoxy.com Epoxy Terrazzo

100% Solids Epoxy Terrazzo Binder


Please note:  Epoxy Terrazzo is not for the do-it-yourselfer or non-epoxy terrazzo contractor.  It takes many years of practice to develop the necessary skills to grind Terrazzo.  If your primary business is NOT terrazzo installation, you cannot successfully install this material.  Instead you should use Epoxy.com Chip Flooring.

Epoxy.com  EPOXY TERRAZZO is a 100% solids, two component epoxy resin system containing colored pigments and mixed with a wide selection of decorative aggregates. Epoxy.com  EPOXY TERRAZZO is trowel applied to a 1/4" to 3/8" nominal thickness to provide an attractive terrazzo finish. Epoxy.com  Epoxy Terrazzo provides outstanding durability and wear resulting in the lowest life cycle costing of any flooring system available. Epoxy.com™ EPOXY TERRAZZO does not support bacterial growth and is also available in a conductive form to eliminate static electricity.



  • Activity Centers
  • Airports-Baggage/Service/Terminals
  • Animal Areas
  • Beverage Processing Areas
  • Cafeterias
  • Chemical Processing
  • Clean Rooms
  • Computer Assembly
  • Commercial Kitchens
  • Convention Centers
  • Correction Facilities
  • Corridors
  • Food Processing Areas
  • Food Preparation and Service
  • Hospitals-Patient Rooms/Operating Rooms
  • Laboratories
  • Pharmaceutical Plants
  • Shopping Malls
  • Waste Water Treatment Facilities



  • Quick curing and finishing time
  • Weighs less than conventional terrazzo: More suitable for muti-story buildings
  • Abrasion resistant
  • Deep color capabilities allow for design variations



  • Substrate temperature must be a minimum of 55? F.
  • Substrate must be free of dirt, waxes, curing agents, and other foreign materials
  • All control and expansion joints in the substrate must be revealed with the appropriate divider strips in the terrazzo topping



100% solids epoxy resin containing decorative marble, granite, or other aggregates.

System Performance Properties
Flammability ASTM D-635 Self extinguishing
Fungus & Bacteria Resistance

MlL-F-52505 §

Will not support growth of fungus or bacteria when subjected to mildew and bacteria tests.
Electrical Conductivity Nonconductive. Conductive Formulation is available.
Bond Strength to Concrete, p.s.i

ACI COMM # 403, Bulletin 59-43

350 p.s.i (100% concrete failure)
Resistance to Elevated Temperature

Mil-D-3134F § 4.7.4

No slip or flow at required temperature of 158° F
Indentation MIL-D-3134F § 4.7.4 Withstands 2,000 1bs./sq. in. for 30 minutes without indentation
Water Absorption, % ASTM D-570 .010
Thermal Shock Resistance ASTM C-884 Passes
Abrasion Resistance ASTM D-4060 35 mg
Impact Resistance MIL-D-3134F § 4.7.3 Withstands 16ft/lbs. without cracking, delamination, or chipping.
Compressive Strength, p.s.i

ASTM C-579, 7 days

9,000 min.
Tensile Strength, p.s.i ASTM C-307 2,500
Flexural Strength, p.s.i ASTM C-580 3,000
Thermal Coefficient of Expansion, in/in/° F

ASTM C-531




Neat Resin Performance Properties
Compressive Strength, p.s.i ASTM-D695 15,500
Ultimate Tensile Strength, p.s.i ASTM-D638 3,000
Tensile Elongation, % ASTM-D638 4-8
Flexural Strength, p.s.i ASTM-D-790 4,000
Flexural Modulus, p.s.i ASTM-D-790 2.3 x 105
Hardness ASTM-D-2240 65-85



The Epoxy.com EPOXY TERRAZZO flooring system provides broad design flexibility. Unlimited beauty is achieved by selecting colors, patterns, and aggregate. Intricate, lasting designs can be created to the owner's requirements. Epoxy.com ™ EPOXY TERRAZZO allows the interior designer a wide choice of color from deep reds and blues to pastels. Colors will not fade or wear thin. The imaginative use of divider strips, including brass, allows Epoxy.com  EPOXY TERRAZZO to produce lasting variations of colors, designs, and configurations.



Epoxy.com  EPOXY TERRAZZO is ideal for almost any area where a monolithic, heavy duty floor surface is needed. In addition, Epoxy.com  ™ EPOXY TERRAZZO provides the ultimate in beauty and design. It is ideal for commercial, industrial, and institutional applications. Epoxy.com  ™ EPOXY TERRAZZO, when combined with marble or granite aggregate, withstands heavy industrial wear and chemical attack making it ideal for pharmaceutical and chemical plants. Epoxy.com  ™ EPOXY TERRAZZO is the best choice for schools, hospitals, institutions, and health care facilities due to its sanitary, joint free surface that is easily cleaned. Epoxy.com  ™ EPOXY TERRAZZO achieves the lowest life cycle costing of any hard surface flooring.



18-24 hours prior to grinding.


Surface Preparation

Concrete surfaces must be in sound condition and properly prepared per manufacturer's recommendations. Contact Epoxy.com Technical support for surface preparation guidelines.



Set divider strips according to architect's specifications for appearance.

Prime the substrate with Epoxy.com  Product #K502 100% Epoxy Primer. Allow to set for a minimum of 30 minutes before applying Epoxy.com  EPOXY TERRAZZO.

Mix Epoxy.com  EPOXY TERRAZZO 3 parts A to 1 Part B by volume for 3 minutes; add the specified aggregate.

Install Epoxy.com  ™ EPOXY TERRAZZO to the thickness specified in the architect's design.

Trowel finish and compact to desired thickness and allow to cure.

Rough grind Epoxy.com  ™ EPOXY TERRAZZO surface using 24 grit stones then follow with a medium grind using 80 grit stones.

Grout Terrazzo surface with Epoxy.com™ EPOXY TERRAZZO GROUT to seal the surface and fill pores and pinholes. Allow the floor to cure overnight.

Polish by grinding surface with fine grit stones. Grouting and polishing procedure may need to be repeated if porosity remains.

Clean surface thoroughly and seal with either Epoxy.com  ™ ACRYLIC SEALER or Epoyx.com ™ URETHANE FINISH depending on the specified performance requirements.



After completing the application of Epoxy.com  EPOXY TERRAZZO, the installer should provide the owner with maintenance instructions. If floors become slippery due to animal fats, oil, grease, or soap film, clean and rinse thoroughly. Epoxy.com  ™ EPOXY TERRAZZO is easily cleaned with neutral soaps or detergents. Routine mechanical scrubbing is recommended for all surfaces having a non-skid texture. Waxing is optional. Long periods of heavy traffic May cause wear patterns necessitating a Maintenance application of a finish coat.



Epoxy.com Technical Support Department provides services and consultations on material selection, specification, troubleshooting, and other information on the proper repair and protection of concrete surfaces.




Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information on Epoxy.com Products please contact:

A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 300 products,
Since 1980
Florida & Vermont

Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch.

321-206-1833   Customer Service - Ordering and Order Status
                          Katey Fontaine, VP - Customer Service Director

 352-533-2167  Technical Support
                         Norm Lambert, President - Technical Support Director 
352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO

352-489-1625   Fax line to all Departments

Website:  www.epoxy.com

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Copyright 1994-2014 (providing online information about the right product for the right job for 20 years) EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

Epoxy.com a division of Epoxy Systems, Inc.  (hereinafter known as "Supplier" warrants its products (when properly stored) for the period of time as follows: Epoxy one (1) year; Polyesters, Methyl Methacrylate  and Polyurethanes Six (6) months.  Supplier warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Supplier. If any product fails to meet this warranty, the liability of Supplier will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Supplier within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Supplier may in its discretion refund the price received by Supplier in lieu of replacing the material. No customer, distributor, or representative of Supplier is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Supplier. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Supplier reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. SUPPLIER'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND SUPPLIER SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are made on an individual order basis.   Unless authorized in writing by us in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.


[Home] [Catalog of Products [MSDS in Acrobat Format]  [Online Ordering Authorization Form] [Add Epoxy.com to Favorites]

Hit Counter