100% Solids Solid Colored Polymer Flooring System
Product PolymericF a two component, 100% solids Pigmented Polymeric Flooring Resin used for high indoor traffic areas where abrasion resistance is required; for protection against mild corrosion; and as a solid colored industrial flooring system. PolymericF is blended with select silica sands used as a workhorse industrial flooring system.
Surface must be clean and sound. Remove all dirt, laitance, grease, curing compounds, and other foreign matter by sandblasting, shot blasting, Epoxy.com Dust Free Grinding System, or other mechanical abrasion. Remove water and dust from all surfaces with an oil-free blast or vacuum immediately prior to application.
Temperature of Product PolymericF must be 50 degrees F or above at time of mixing. Stir each component separately before blending. Mix two parts by volume of Part A with one part by volume of Part B for three minutes with a low speed electric drill motor equipped with a mixing paddle.
Apply Product PolymericF with a roller, brush, or trowel at a thickness as required to provide the required thickness. Then broadcast with select dry silica sand. When dry Topcoat with a neat coating of Epoxy.com PolymericF.
DO NOTapply at temperatures below 40 degrees F. Surface must be dry.
Prolonged or repeated exposure may cause eye and skin irritation. If contact occurs, wash immediately and seek medical help. Use safety glasses with side shields and wear protective rubber gloves.
All tools and equipment should be cleaned before the system gels. Use MEK, Acetone, or any lacquer solvent.
Here are some related materials that will be helpful in using this product. Acrobat format materials provide a way to view and print high quality, well formatted, documents that can be easily printed for submittals.