[Epoxy Home] [Catalog of Products] [Where to Start] [Guide Specs] [Epoxy Installation Guides] [Blog Posts] [Epoxy Bonding Systems] [Chip Floors] [Chemical Resistant Epoxy] [Seamless Coatings] [Conductive Epoxy Flooring] [Crack Injection of Concrete & Wood] [Applications] [Elastomeric Polyurethane Systems]  [Seamless Garage Flooring Resins] [High Temperature Epoxy Resins] [Seamless Industrial Floors] [Joint Systems & Sealants] [Methyl Methacrylate MMA ] [Novolac Epoxy Resins] [Epoxy Mortars & Grouts] [Epoxy Novolac] [Primers Sealers] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Epoxy Installation Tips] [Who We Are]  [Epoxy Tech Data Sheets in Acrobat] [Product MSDS Sheets] [Online Order Authorization Form][Contact UsPhone 352.489.1666

  Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980Contact Us  

Epoxy.com Installation Guide #1

Epoxy Coating Installation

Did You Know?

Product #1, Product #2, and Product #630 are all available in a normal (floor grade) and also in a Wall Grade.  The floor grade coating levels better on floors.  The wall grade hangs better on the wall, minimizing runs.

Product #1, and Product #2 are available in normal cure, fast cure and cold cure.

Before installing epoxy coating it is important that you first do proper surface preparation.  Please review the Epoxy.com "Surface Preparation" Technical Bulletin at http://www.epoxy.com/surfaceprep.aspx .  You will also want to review the "Does and Don'ts" located at http://www.epoxy.com/install.htm

If you do not have access to the internet please contact Epoxy.com Customer service at 321-206-1833 and ask to have it faxed or postal mailed to you.

  Must Visit Links

Products Covered by this Guide

Although each Epoxy.com may have slight variations in installation technique, this guide is an excellent tool when installing the following Epoxy.com Products:


Primers can be one of the most important considerations of your installation.  Most of the products covered under this installation guide can be installed without a primer.  However, there can be major advantages to your job if you use the right primer.  For example if you use Product #899 Primer under

Using a roller to measure liquid epoxy measurements.
Using the ruler method of measuring epoxy resin for coating.

Proper Mixing

One method to insure accurate mix ratios is to put measurements on sticks, with the appropriate mix ratio.  The picture to the right is a picture of a 2:1 mix ratio, using this method

Crack and Joint Repairs

After a floor is properly cleaned, the next step is repairing the random cracks, cold joints and saw-cut joints.

Repair non-moving joints and cracks with Epoxy.com Product #703. Minor holes and depressions can be filled with Product #703. as well. Major resurfacing of very rough floors can be done with any of the Epoxy.com Epoxy or Polymeric mortar systems.

Joints can also be filled with Epoxy.com Product #11 Flexible Joint Filler.  

Structural cracks should be repaired by epoxy injection  or Epoxy.com Product #685 Crack Healer-Sealer .

Non-moving joints and cracks can be repaired with Epoxy.com Product #703.  Minor holes and depressions can also be filled with Product #703 as well.

Major resurfacing of very rough floors can be done with any of Epoxy.com Epoxy, or Polymeric mortar systems like Epoxy.com - Product #10, Product #15, Product #25, Product #28,or Product #680.

Moving joints can also be filled with Epoxy.com Product #11 or with Epoxy.com Product #703.


Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information on Epoxy.com Products please contact:

A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 300 products,
Since 1980
Florida & Vermont

Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch.

321-206-1833   Customer Service - Ordering and Order Status
                          Katey Fontaine, VP - Customer Service Director

 352-533-2167  Technical Support
                         Norm Lambert, President - Technical Support Director 
352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO

352-489-1625   Fax line to all Departments

Website:  www.epoxy.com

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Copyright 1994-2014 (providing online information about the right product for the right job for 20 years) EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

Epoxy.com a division of Epoxy Systems, Inc.  (hereinafter known as "Supplier" warrants its products (when properly stored) for the period of time as follows: Epoxy one (1) year; Polyesters, Methyl Methacrylate  and Polyurethanes Six (6) months.  Supplier warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Supplier. If any product fails to meet this warranty, the liability of Supplier will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Supplier within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Supplier may in its discretion refund the price received by Supplier in lieu of replacing the material. No customer, distributor, or representative of Supplier is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Supplier. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Supplier reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. SUPPLIER'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND SUPPLIER SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are made on an individual order basis.   Unless authorized in writing by us in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.


[Home] [Catalog of Products [MSDS in Acrobat Format]  [Online Ordering Authorization Form] [Add Epoxy.com to Favorites]

Hit Counter