Insert Body Here this is a t

Home | Up|Tech Data Sheets in Acrobat Format | MSDS in Acrobat Format | Online- Ordering Authorization Form | Home Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980
Insert Body Here

this is a tes




Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:
A Division of
Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 300 products,
Since 1980
Florida & Vermont

Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch.

321-206-1833   Customer Service - Ordering and Order Status
                          Katey Fontaine, VP - Customer Service Director

714-657-3826  Technical Support
                         Norm Lambert, President - Technical Support Director 
352-489-1666   Accounting and Administration
                          Debby Lambert, CEO, and CFO

352-489-1625   Fax line to all Departments

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

Copyright 1994-2008 EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved. a division of Epoxy Systems, Inc.  warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months;  Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight  Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days. warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of If any product fails to meet this warranty, the liability of will be limited to replacement of any non-conforming material if notice of such non-conformity is given to  within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). may in its discretion refund the price received by in lieu of replacing the material. No customer, distributor, or representative of is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. 'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND  SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are made on an individual order basis.   Unless authorized in writing by a division of Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.


[Home] [Up] [#315 Guide Specification] [1005 Rapid Set] [15 Install Guide Single Broadcast] [16 Mortar Resin] [2 Wall Grade] [2:1] [20 Epoxy Grout] [21 Pumpable Mortar] [214 Spread Rate Calculator] [214 Spread Rate Calculator] [22 Underwater Epoxy Mortar] [223 Sealer] [229 Acrylic Epoxy] [24 Pigmented Mortar] [25 Epoxy Mortar Kit] [26 Epoxy Mortar Kit] [28 Epoxy Mortar] [2Component Urethane Coating] [3.5:1] [302 Injection] [303 Low Viscosity] [304 Injection] [305 & 306 Injection Resins] [4 Urethane Injection] [408 Urethane  Waterproofing] [409 Traffic Bearing Membrane] [41 Siloxane Sealer] [415 Elastomeric Membrane] [416 Polyurethane Coating] [417 Elastomeric Waterproofing] [417 for Potable Water] [418 Elastomeric Membrane] [419 Waterproofing Membrane] [42 Siloxane with Corrosion Inhibitors] [426 Accelerator] [429 Accelerator] [432 Urethane] [441] [450 Elastomeric Flooring] [450MR] [450X2 Urethane Decking System] [451Polyurethane Coating] [452 Polyurethane Coating] [5000 Expansion Bearing] [600 Flexible Novolac] [630 Novolac Mortar & Coating] [631 Chemical Resistant Coating] [635 Novolac] [636 High Temp Chemical Resistant Primer/Topcoat] [637 High Temp Coating] [641 LV] [643 High Chem Resistant] [648 Chemical Resistant Coating] [670 Vinyl Ester] [681 MMA Primer] [684 Crack Welder/Sealer] [6SC Long Potlife Adhesive] [701 Flexible Bonder] [702 Traffic Marker Adhesive] [705 Adhesive] [706 Heat Resistant Mortar] [707 Under Water Epoxy] [720 Cove Base] [75 Epoxy Filler] [810 Primer for Polyurea] [830 Jump Page] [845 Penetrant & Prime Coat] [893 Primer Water Based] [899 Primer] [9 - Mortar Adhesive] [900 Caulking] [901 Polymeric Joint Sealant] [905 Polysulfide Caulk] [910 Polyurethane Caulk] [914 Jet Fuel Resistant Sealant] [930 Polyurea Joint] [Acrylic Sealer] [Acrylic Sealer] [Acrylic Sealer] [Aggregates] [Aggregates] [Air Operated Injection Equipment] [Anchor Set] [Back key] [Bitumen Modified Urethane Sealant] [Brushable Polyurea] [Button Bar] [C881DEF] [Casting Resin Epoxy Casting Resin] [Catalog of Products] [Catalog of Products] [Catalog of Products] [Catalog of Products] [Catalog of Products] [Chemical & Heat Resistance] [Chemical Resistance Epoxy, Polyures, Polysulfide and Vinyl Ester] [Chemical Resistant] [Chemical Resistant Urethane] [Chemical Sites] [Chip Flooring / Flake Flooring] [Chip Floors] [Chips Flooring / Flake Flooring] [Clear Casting Resin] [Clearance Sale] [Coal Tar Epoxy] [Coal Tar Epoxy 100% Solids] [Coating Colors Polymer and Epoxy] [Coating Installation] [Coating Installation] [Coating Systems] [Coating Systems.] [coatings] [Cold Cure Primer] [Cold Temp Cure Coating] [Cold Temp Cure Mortar] [Cold Temp Cure Primer] [Cold Temperature Cure Coating] [Cold Temperature Cure Mortar] [Color Chart] [Concrete Admixture] [Concrete Stain] [Conductive] [Conductive Epoxy 672] [Conductive Epoxy Installation] [Conductive Primer/Sealer] [conductive.htm] [Contact Information] [Conversion Calculators] [Conversions] [Cove Base] [Dealers Wanted] [Decorative Elastic Floor] [Do with Epoxies] [Don't do this when mixing and installing Epoxy] [Dowel Bar & Anchor Bolt Adhesive] [Dowel Bar Adhesive Calculator] [Driveway and Athletic Surface] [Elactro-Static Dissipative] [Elastomeric & Polyurethane Systems] [Elastomeric Membrane] [Elastomeric Mortar] [Elastomeric Multi-Colored Floor] [Electric Injection Equip] [Electrical Epoxy Encapsulation and Casting Resin] [Electrostatic Dissipative Urethane Coating] [Emergency Epoxy Gel] [Epoxy] [Epoxy Bonding and Adhesive Systems] [Epoxy Coating] [Epoxy Coating &Ultra Pure Water Tank Coating (RODI)] [Epoxy Extender] [Epoxy Flooring Spec] [Epoxy Garage Floors] [Epoxy Injection] [Epoxy Joint Filler] [Epoxy Mortar] [Epoxy Mortar Product Overview] [Epoxy Polyamine] [Epoxy Primer] [Epoxy Primer 888] [Epoxy Systems Product #63 EVA Tech Data Sheet] [Epoxy Systems, Inc.] [Epoxy Terrazzo] [ Loop Sealant] [Error 404 File Not Found] [Error 404 File Not Found] [EVA Expansion Joint] [eva_spec.htm] [FAQs] [Fast Set Gel Adhesive] [Fast Setting Mortar] [Fast Setting Water Based Epoxy] [feedback confirmation] [Fiber Reinforced Mortar] [Flame Retardant Structural Foam] [Flex Epoxy #32] [Flexible Epoxy] [Flexible Gel Adhesive] [Floor WaterProofing - Under Construction] [Form Mail Us] [Gel - Normal] [Gel Extender] [General Purpose] [Guest Book] [Guest Book 1999] [Guest Book 2000] [Guest Book 2001] [Guest Book 2002] [Guest Book 2003] [Guest Book 2004] [Guide Specs] [High Temp Epoxy #641] [High Temp Resistant Mortar] [High Temperature] [High Temperature] [HMWM Polymer Concrete] [HTML DOM Examples] [Injection Gun] [Important Epoxies] [Industrial Flooring] [Injection] [Injection Accessories] [Injection Procedures] [Injection Spec] [Injection Spec] [Insert Body Here     this is a t] [Installation Tips] [Jet Fuel Resistant Polysulfide Sealant] [Job History] [Job History of Chip Flooring / Flake Flooring] [Joint Sealant Polyurethane Bitumen Modified] [Joint Systems & Sealants] [Manual Table of Contents] [Mast Head] [Mastic High Build Epoxy] [Mechanical Room] [Metal Filled] [Methyl Methacrylate] [Misc.] [MMA Crack Healer and Sealer] [MMA Patching] [MMA Polymer Concrete] [Mortar - Self Leveling] [Mortar General Purpose] [Mortars / Grouts] [Multifunctional Epoxy] [Neat Resin Spread Rate Calculator] [new Button Bar] [New Page 1] [New Page 1] [News] [Novolac Adhesive] [Novolac Coating] [Novolac Flooring] [Novolac High Temperature Epoxy] [Novolac Joint Filler] [Oil Stop Primer] [Order Authorization] [Orderform] [Patching Systems] [Pipe Coating] [Polyester Grout #150] [Polyester Paste] [Polymer Floor Sealer] [Polymer Systems] [polymericf] [PolymericF Guidespec] [Polysulfide Sealant 2 Component] [Polyurea Sealant] [Precast Segmental Adhesive] [Primer 899] [Primers & Sealers] [Primers and Sealers] [Print] [Problems & Solutions] [Product #1] [Product #115 "C" Component] [Product #115 Jump Page] [Product #2 Chemical Resistant Coating] [Product #225 Caculator] [Product #256] [Product #26] [Product #27] [Product #315BC] [Product #407] [Product #450 HT] [Product #454] [Product #651] [Product #71 Thickening Agent] [Product #78 Self Leveling Epoxy Filler] [Product 15 Installation - Double Broadcast] [Product 870 (65% Solids - Penetrating Epoxy Sealer)] [Product 870 (65% Solids - Penetrating Epoxy Sealer)] [Product Guide] [Quartz Flooring] [Rebar Coating] [Repair Mortar] [Resin Home Page :)] [Resinous Mortars and Their Uses In Construction] [Resurfacing Grade Epoxy] [Rigid Polyurethane Foam] [Roof Coating] [Sealant Primer] [Seamless Flooring] [search page] [Search Site] [Self Leveling Polymer Cement] [Shared Bottom Border] [Shared Bottom Border] [Shared Bottom Border] [Shared Top Border] [Shared Top Border 2] [Shut Down Instructions] [Silane Sealer] [Silane Sealer] [Simple 4 function Calculator] [Site Directory] [Slow Cure Wet to Dry] [Solvent Free Resins - "0" VOCs] [Spec 2 Concrete] [Spec 2 Steel] [Special] [Specification for #2 on Steel.] [Sprayable Polyurea Coating] [Starting Floors] [Static Dispensing] [Static Mixer] [Stone Overlays] [Structural Foam] [Stuctural Foam Flame Retardant] [Surface Preparation] [Surface Preparation] [Surface Preparation] [Table of Contents] [Tech Data in Acrobat] [Tech Data Sheets in Acrobat Format] [Tech Data Sheets In Adobe Acrobat Format] [Technical Service] [The Right Epoxy for the Right Job - Since 1980] [The Right Epoxy for the Right Job - Since 1980] [The Right Epoxy for the Right Job - Since 1980] [The Right Epoxy for the Right Job - Since 1980] [The Right Epoxy for the Right Job - Since 1980] [Tile Adhesive] [Tile Grout +  Adhesive +Filler] [Tile Grout Adhesive and Filler] [Tile Setting Epoxy] [Traffic Marker Adhesive] [Traffic Membrane] [Training] [Ultra Fast Mortar] [Underwater Mortar] [Untitled 1] [Untitled 1] [Untitled 1] [Untitled 1] [Urethane - 100% Solid - Zero VOC] [Urethane #401] [Urethane 402] [Urethane Foams] [Urethane Injection] [Usage Data] [Use the form below to search for] [Vinyl Ester] [Wall Grade Coating] [Water Based Epoxy] [Water Based Epoxy Coating.] [Water Based Siloxane #39] [Waterproofing Systems, Epoxy, Poyurethane Etc.] [Wet to Dry] [Whats New] [Who We Are] [Wood Adhesive] [Wood Filler] [Zinc Ritch Primer] [addguest.html] [Catalog of Products] [Fast Set Flooring] [googlecce54cd2701a1b4a.html] [Guest Book 96-98] [High Temp/Chem Resist] [HMWM Polymer Concrete] [Industrial Flooring] [Mechanical Room Floor] [Search Engine] [Search Engine] [Technical Data In Acrobat Format] [The Right Epoxy for the Right Job] [The Right Epoxy for the Right Job - Since 1980] [The Right Epoxy for the Right Job - Since 1980] [The Right Epoxy for the Right Job - Since 1980] [The Right Epoxy for the Right Job - Since 1980] [This Web site coming soon] [Technical Data Sheets in Adobe Acrobat Format][MSDSs in Adobe Acrobat Format][Online- Ordering Authorization Form]

Hit Counter


Secure Login