Epoxy .com Product #901
Pourable Polymeric Joint Sealant
Epoxy .com Product #901 Self Leveling Pourable Polymeric Joint Sealant is a 2 part chemically cured elastomer. They provide a flexible and watertight seal between concrete, masonry, metals, glass, wood, and other construction materials. For Gun Grade use Epoxy .com Product #900 (Gun Grade). Mix material just prior to application. Color is light gray. (Other colors are available on special order.)
Epoxy .com Product #901 Self Leveling Pourable Polymeric Joint Sealant bonds tightly to any clean, dry surface. The cured sealant have excellent flexibility and performs well to -20°F. Joint movement plus or minus 25% is easily accommodated through years of outdoor exposure. Epoxy.com Product #901 Self Leveling Pourable Polymeric Joint Sealant resist the effects of temperature extremes, seasonal weather changes, sunlight, moisture and chemical attack. Life expectancy is up to 20 years under normal conditions.
Epoxy .com Product #900 Polymeric Joint Sealant has excellent electrical properties. Typical electrical properties of cured material at 77°F (25°C) and 50% relative humidity are as follows:
Epoxy .com Product# #901 Polymeric Joint Sealants meets the following specifications:
National Bureau of Standards and GSA TT-S-0227E (1970) *
* Defers test specification to ASTM C-920-95
Joint interface must be clean, dry, and free from oils, loose mortar, laitance, waterproofings, and other contaminants. A thorough grinding, sandblasting, or solvent cleaning may be required to expose clean, sound surfaces. Priming is not normally required with common building materials. However, an instance may occur where priming is necessary for certain substrates or for water immersion, and Epoxy .com Product #950 Sealant Primer should be used. The Product #900/901 must be applied within 8 hours after priming. Re-prime if time limit has expired.
Mix "A" and "B" Components with a slow speed mechanical mixer for 3 minutes. Use Product #900 with caulking gun or mechanical equipment. Epoxy.com Product #901 may be poured into joint from container or from watering can. For large projects, mechanical placing equipment may be utilized.
Apply immediately after mixing into properly sized joints. Backer Rod may be required.
If a primer is required us Epoxy .com Product #950 Joint Sealant Primer. Product #950 Joint Sealant Primer is a one component moisture curing primer formulated to improve adhesion of our Epoxy.com Joint Sealants. Epoxy .com Product #950 Joint Sealant Primer is easy to use and provides extra protection in applications where standing water or submersion will be present. Epoxy .com Product #950 Joint Sealant Primer acts to increase bond between organic and inorganic interfaces, binding together weak areas and creating a tough surface.
Do not install in damp or wet joints. Temperature should be above 40°F (4.4°C) at time of application to assure proper curing.
Repeated or prolonged contact with skin should be avoided; protective gloves should be worn as a precaution. Avoid contact with eyes; in case of eye contact, flush with water for 15 minutes and consult a physician.
Other customers who visited this page also visited:
FOR INDUSTRIAL USE ONLY / KEEP AWAY FROM CHILDREN