Epoxy.com ACRYLIC SEALER Product #239 is a clear acrylic solution formulated to create a clear, non-yellowing protective coating. Epoxy.com ACRYLIC SEALER provides a tough, UV and abrasion resistant film that effectively protects surfaces from moisture penetration, staining, dirt, dust, and wear. Providing a surface that is easy to clean and maintain, Epoxy.com ACRYLIC SEALER is an excellent choice for both interior and exterior applications.
Epoxy.com ACRYLIC SEALER is most commonly used as a sealer for Epoxy.com Epoxy Terrazzo and Epoxy.com Polymeric Terrazzo flooring systems. It is also used for sealing old and new concrete floors, Concrete Countertops, exterior ramps, decks, sidewalks, slate, and exposed aggregate surfaces.
Prepare surface in accordance with Epoxy.com, Technical Bulletins. New concrete must be cured at least 30 days. All concrete curing compound must be mechanically removed, along with any foreign material Old concrete must be structurally sound and prepped according to guidelines. For more information see Epoxy.com Surface Preparation Procedures.
Epoxy.com ACRYLIC SEALER is a single component acrylic solution. Stir material in container prior to application. Do not reduce.
Apply by roller, brush, or applicator pad. Spread at an even rate between 300 and 500 square feet per gallon. Two coats are recommended for sealing applications.
Re-coat in 2 to 4 hours at 70°F with 50% RH. Low temperatures or high humidity may significantly increase cure time. Do not open to light traffic for at least 24 hours after application
Clean tools with Xylene or lacquer thinner.
|Mixing Ratio, by volume||Single Component|
|Solids Content, by volume||20%|
|Weight per Gallon, mixed||
After completing the application of Epoxy.com ACRYLIC SEALER, the installer should provide the owner with maintenance instructions. If floors become slippery due to animal fats, oil, grease, or soap film, promptly remove contaminants and rinse thoroughly.
Epoxy.com ACRYLIC SEALER is easily cleaned with neutral soaps or detergents. Routine mechanical scrubbing is recommended for all surfaces having a non-skid texture. Waxing is optional. Long periods of heavy traffic may cause wear patterns necessitating a maintenance application of a finish coat.