[Epoxy Home] [Catalog of Products] [Where to Start] [Guide Specs] [Epoxy Installation Guides] [Blog Posts] [Epoxy Bonding Systems] [Chip Floors] [Chemical Resistant Epoxy] [Seamless Coatings] [Conductive Epoxy Flooring] [Crack Injection of Concrete & Wood] [Applications] [Elastomeric Polyurethane Systems]  [Seamless Garage Flooring Resins] [High Temperature Epoxy Resins] [Seamless Industrial Floors] [Joint Systems & Sealants] [Methyl Methacrylate MMA ] [Novolac Epoxy Resins] [Epoxy Mortars & Grouts] [Epoxy Novolac] [Primers Sealers] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Epoxy Installation Tips] [Who We Are]  [Epoxy Tech Data Sheets in Acrobat] [Product MSDS Sheets] [Online Order Authorization Form][Contact UsPhone 352.489.1666

  Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980Contact Us  


Epoxy.com Product # 229

Two Component, Water Based, High Performance Coating

Raw Materials for this material are currently on National Back Order - Please contact Epoxy.com Technical Support at 321-206-1833 for an alternate product.


Epoxy.com  #229 is a two component, water based, high performance coating suitable for concrete and other commonly used building materials. Epoxy.com  #229 combines the exterior durability and gloss retention of acrylic with the adhesion and toughness of epoxy. Features of Epoxy.com  #229 include excellent resistance to abrasion, staining, and common chemicals. Epoxy.com  #229 has excellent interior and exterior durability. Epoxy.com  #229 was developed as a high performance topcoat for protection of exterior/interior concrete floors and walls. It is ideal for clean rooms, laboratories, driveways, garages, walks, and patios.


Low Odor During Application & Cure

Fast Dry & Re-coat Time

Easy Clean-Up


Stain Resistant

Good Gloss & Color Retention


Not recommended for use where strong solvents are anticipated.

Substrate temperature must be a minimum of 50F and relative humidity below 85% for proper cure.

Substrate must be free of dirt, waxes, curing agents, and other foreign material.

Typically self-priming, but depends on density and condition of substrate. Product may require two coats.


Waterborne Acrylic Epoxy.


Epoxy.com  #229 is available in most Standard Colors. Contact Epoxy.com for assistance.



Surface Preparation is the most critical portion of any successful resinous flooring system application. All substrates must be properly prepared as outlined on the Epoxy.com website.  Epoxy.com Technical service department is pleased to answer any questions.


Mix each component of Epoxy.com  #229 prior to combining. Mix 1 part Part A with 4 parts Part B and allow to stand 15-30 minutes before applying. Roll mixed Epoxy.com  #229 at a rate of 300-400 ft2 per gallon with a non-shedding, short nap roller. Care should be taken to avoid puddles. Do not build a film of the sealer. Roll out so that it soaks into the concrete. Two coats are necessary to insure uniform wetting and coverage when used as a stand alone sealer. The second coat may be applied as soon as the first coat is tack free. For complete installation instructions, contact Epoxy.com technical service department .


Skin and tools can be cleaned with soap and water. Xylene and/or lacquer thinner will also clean tools and equipment. Consult Material Safety Data for safety and health precautions.


Epoxy.com  #229 can be re-coated very rapidly. Follow the re-coat windows specified below:

Re-coat 3-6 hours

Light Traffic Overnight

Heavy Traffic 5-7 days

Thicker application and cooler temperatures will lengthen tack free time.


Epoxy.com  #229, when applied at 300 ft2, yields 1.8-2.0 mils dry film/


Viscosity @ 75F 250-270 cps
Mixing Ratio 1 Part A to 4 Parts B by Volume
Solids Content 38-40% by Volume
Volatile Organic Content (VOC) 64.36 gm/L (0.54#/gallon)
Bond Strength to Concrete 300-400 psi (100% concrete failure)
Weight per Gallon 9.5-9.7 pounds per gallon, mixed


Pot Life 4-6 hours
Dry to Touch 2-4 hours @ 75F
Re-Coat 3-6 hours @ 75F
Light Traffic 18-24 hours @ 75F
Heavy Traffic 5-7 days

Higher temperatures and good ventilation will accelerate dry times; lower temperatures and higher humidity will lengthen dry times.


Epoxy.com  #229 is easily cleaned with neutral soaps or detergents. Routine mechanical scrubbing is recommended for all surfaces having a non-skid texture. Long periods of heavy traffic may cause wear patterns necessitating a maintenance application of a finish coat.



Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information on Epoxy.com Products please contact:

A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 300 products,
Since 1980
Florida & Vermont

Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch.

321-206-1833   Customer Service - Ordering and Order Status
                          Katey Fontaine, VP - Customer Service Director

 352-533-2167  Technical Support
                         Norm Lambert, President - Technical Support Director 
352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO

352-489-1625   Fax line to all Departments

Website:  www.epoxy.com

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Copyright 1994-2014 (providing online information about the right product for the right job for 20 years) EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

Epoxy.com a division of Epoxy Systems, Inc.  (hereinafter known as "Supplier" warrants its products (when properly stored) for the period of time as follows: Epoxy one (1) year; Polyesters, Methyl Methacrylate  and Polyurethanes Six (6) months.  Supplier warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Supplier. If any product fails to meet this warranty, the liability of Supplier will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Supplier within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Supplier may in its discretion refund the price received by Supplier in lieu of replacing the material. No customer, distributor, or representative of Supplier is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Supplier. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Supplier reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. SUPPLIER'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND SUPPLIER SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are made on an individual order basis.   Unless authorized in writing by us in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.


[Home] [Catalog of Products [MSDS in Acrobat Format]  [Online Ordering Authorization Form] [Add Epoxy.com to Favorites]

Hit Counter