Epoxy.com' Product #225
Water Cleanable Epoxy Grout and Adhesive With Filler Powder
Epoxy.com Product #225 is a user friendly, water cleanable, 100% solids epoxy grout and adhesive and Filler Powder . Used for grouting ceramic tile, brick pavers, and stone, Epoxy.com Product #225 is supplied in pre-packaged kits containing resin, hardener, and mineral fillers that produce a dense, uniform seal. Typical applications for Epoxy.com Product #225 require resistance to thermal shock, chemicals, and heavy traffic including meat packers, breweries, canneries, bottlers, CIP areas, and pharmaceutical formulators.
Empty entire contents of Part A and Part B into a clean mixing pail. Wtih a slow speed drill or margin trowel, mix until liquids are completely blended. Add at least ¾ of the TILE GROUT FILLER (more for wide joints) and blend until uniform.
Pour mixed Epoxy.com Product #225 onto working area. Following standard epoxy and grouting techniques, apply to surface. Be sure all grouted joints are completely filled. Remove excess grout with grout float. Do not leave excess grout on face of tiles. For complete installation instructions, contact Epoxy.com Technical Service.
Some tiles and pavers can be stained by color pigments in Epoxy.com Product #225. Try small area to determine results before grouting entire surface.
Clean skin with soap and water. Tools and equipment should be cleaned with xylene or lacquer thinner. Consult Material Safety Data for safety and health precautions.
After completing the application of Epoxy.com Product #225, the installer should provide the owner with maintenance instructions. If floors become slippery due to animal fats, oil, grease, or soap film, clean and rinse thoroughly.
Epoxy.com Product #225 is easily cleaned with neutral soaps or detergents.
Custom colors are available subject to laboratory approval, minimum quantity, lead time for production, and increased cost.
the picture of color card below for a larger version of this picture
of the color chart.
Need help figuring out how much Product #225 you will need.
Use the Epoxy.com Product #225 Grout Calculator.